Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Design of cyclic fixed‐bed adsorption processes. Part I: Phenol adsorption on polymeric adsorbents

Design of cyclic fixed‐bed adsorption processes. Part I: Phenol adsorption on polymeric adsorbents A model for the adsorption of phenol in a fixed bed of a polymeric adsorbent is developed. Model parameters (equilibrium parameters, capacity factor, axial dispersion, film mass transfer coefficient, and intraparticle effective diffusivity) are experimentally determined from independent experiments. Numerical solution of the model equations uses the method of lines with double orthogonal collocation in finite elements. The model is used for the prediction of breakthrough curves and is part of a package for the design of cyclic processes. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Aiche Journal Wiley

Design of cyclic fixed‐bed adsorption processes. Part I: Phenol adsorption on polymeric adsorbents

Aiche Journal , Volume 31 (10) – Oct 1, 1985

Loading next page...
 
/lp/wiley/design-of-cyclic-fixed-bed-adsorption-processes-part-i-phenol-7Az39WpEuu

References (14)

Publisher
Wiley
Copyright
Copyright © 1985 American Institute of Chemical Engineers
ISSN
0001-1541
eISSN
1547-5905
DOI
10.1002/aic.690311008
Publisher site
See Article on Publisher Site

Abstract

A model for the adsorption of phenol in a fixed bed of a polymeric adsorbent is developed. Model parameters (equilibrium parameters, capacity factor, axial dispersion, film mass transfer coefficient, and intraparticle effective diffusivity) are experimentally determined from independent experiments. Numerical solution of the model equations uses the method of lines with double orthogonal collocation in finite elements. The model is used for the prediction of breakthrough curves and is part of a package for the design of cyclic processes.

Journal

Aiche JournalWiley

Published: Oct 1, 1985

There are no references for this article.