Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Thermal analytical winding size optimization for different conductor shapes

Thermal analytical winding size optimization for different conductor shapes Abstract The aim of this paper is to derive an analytical equations for the temperature dependent optimum winding size of inductors conducting high frequency ac sinusoidal currents. Derived analytical equations are useful designing tool for research and development engineers because windings made of foil, square-wire, and solid-round-wire windings are considered. Temperature dependent Dowell’s equation for the ac-to-dc winding resistance ratio is given and approximated. Thermally dependent analytical equations for the optimum foil thickness, as well as valley thickness and diameter of the square-wire and solid-round-wire windings are derived from approximated thermally dependent ac-to-dc winding resistance ratios. Minimum winding ac resistance of the foil winding and local minimum of the winding ac resistance of the solid-round-wire winding are verified with Maxwell 3D Finite Element Method simulations http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Archives of Electrical Engineering de Gruyter

Thermal analytical winding size optimization for different conductor shapes

Wojda, Rafal P.
Archives of Electrical Engineering , Volume 64 (2) – Jun 1, 2015
Download PDF
18 pages

Loading next page...
 
/lp/de-gruyter/thermal-analytical-winding-size-optimization-for-different-conductor-RieFRAtUOr
Publisher
de Gruyter
Copyright
Copyright © 2015 by the
ISSN
2300-2506
eISSN
2300-2506
DOI
10.1515/aee-2015-0017
Publisher site
See Article on Publisher Site

Abstract

Abstract The aim of this paper is to derive an analytical equations for the temperature dependent optimum winding size of inductors conducting high frequency ac sinusoidal currents. Derived analytical equations are useful designing tool for research and development engineers because windings made of foil, square-wire, and solid-round-wire windings are considered. Temperature dependent Dowell’s equation for the ac-to-dc winding resistance ratio is given and approximated. Thermally dependent analytical equations for the optimum foil thickness, as well as valley thickness and diameter of the square-wire and solid-round-wire windings are derived from approximated thermally dependent ac-to-dc winding resistance ratios. Minimum winding ac resistance of the foil winding and local minimum of the winding ac resistance of the solid-round-wire winding are verified with Maxwell 3D Finite Element Method simulations

Journal

Archives of Electrical Engineering – de Gruyter

Published: Jun 1, 2015

There are no references for this article.