Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Microstructure Characteristic of TiCReinforced Cast Steel after GTAW Remelting

Microstructure Characteristic of TiCReinforced Cast Steel after GTAW Remelting References[1] Rohatgi, P. & Asthana, R. (2001). Solidification Science in Cast MMCs: The Influence of Merton Flemings. JOM. 09, 9-13.[2] Konopka, Z. & Pasieka, A. (2014). The Influence of Pressure Die Casting Parameters on the Mechanical Properties of AlSi11/10 Vol.% SiC Composite. Archive of Foundry Engineering. 14(1), 59-62.[3] Dulska, A., Studnicki, A. & Szajnar, J. (2017). Reinforcing cast iron with composite insert. Archives of Metallurgy and Materials. 62(1), 355-357.[4] Olejnik, E., Sikora, G., Sobula, S., Tokarski, T. Grabowska, B. (2014). Effect of compaction pressure aplied to TiC reactants on the Microstructure and Properties of Composite Zones Produced in situ in steel castings. Material Science Forum. Metallography XV. Vol.782, 527-532.[5] Olejnik, E., Sobula, S., Tokarski, T., & Sikora, G. (2013). Composite zones obtained by in situ synthesis in steel castings. Archives of Metallurgy and Materials. 58(3), 769-773.[6] Wang, X.H., Song, S.L., Qu, S.Y. & Zou, Z.D. (2007). Characterization of in situ synthesized TiC particle reinforced Fe-based composite coatings produced by multipass overlapping GTAW melting process. Surface and Coatings Technology. 201(12), March, 5899-5905.[7] Huebner, J., Rutkowski, P., Kata, D. & Kusiński, J. (2017). Microstructural and mechanical study of Inconel 625 - tungsten carbide composite coatings obtained by powder laser cladding. Archives of Metallurgy and Materials. 62(2), 531-538.http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000406180900010&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=b7bc2757938ac7a7a821505f8243d9f3[8] Sahoo, Ch.K., Soni, L. & Masanta, M. (2016). Evaluation of microstructure and mechanical properties of TiC/TiC-steel composite coating produced by gas tungsten arc (GTA) coating process. Surface & Coatings Technology. 307, 17-27.[9] Piątkowski, J., Grabowski, A. & Czerepak, M. (2016). The Influence of Laser Surface Remelting on the Microstructure of EN AC-48000 Cast Alloy. Archive of Foundry Engineering. 16(4), 217-221.[10] Wrońska, A. & Dudek, A. (2014). Characteristics of surface layer of sintered stainless steels after remelting using GTAW method. Archives of Civil and Mechanical Engineering. 14(3), May, 425-432. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Archives of Foundry Engineering de Gruyter

Microstructure Characteristic of TiCReinforced Cast Steel after GTAW Remelting

Download PDF
4 pages

Loading next page...
 
/lp/de-gruyter/microstructure-characteristic-of-ticreinforced-cast-steel-after-gtaw-a4NJPdF9K5

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
de Gruyter
Copyright
© by S. Sobula
ISSN
2299-2944
eISSN
2299-2944
DOI
10.1515/afe-2017-0148
Publisher site
See Article on Publisher Site

Abstract

References[1] Rohatgi, P. & Asthana, R. (2001). Solidification Science in Cast MMCs: The Influence of Merton Flemings. JOM. 09, 9-13.[2] Konopka, Z. & Pasieka, A. (2014). The Influence of Pressure Die Casting Parameters on the Mechanical Properties of AlSi11/10 Vol.% SiC Composite. Archive of Foundry Engineering. 14(1), 59-62.[3] Dulska, A., Studnicki, A. & Szajnar, J. (2017). Reinforcing cast iron with composite insert. Archives of Metallurgy and Materials. 62(1), 355-357.[4] Olejnik, E., Sikora, G., Sobula, S., Tokarski, T. Grabowska, B. (2014). Effect of compaction pressure aplied to TiC reactants on the Microstructure and Properties of Composite Zones Produced in situ in steel castings. Material Science Forum. Metallography XV. Vol.782, 527-532.[5] Olejnik, E., Sobula, S., Tokarski, T., & Sikora, G. (2013). Composite zones obtained by in situ synthesis in steel castings. Archives of Metallurgy and Materials. 58(3), 769-773.[6] Wang, X.H., Song, S.L., Qu, S.Y. & Zou, Z.D. (2007). Characterization of in situ synthesized TiC particle reinforced Fe-based composite coatings produced by multipass overlapping GTAW melting process. Surface and Coatings Technology. 201(12), March, 5899-5905.[7] Huebner, J., Rutkowski, P., Kata, D. & Kusiński, J. (2017). Microstructural and mechanical study of Inconel 625 - tungsten carbide composite coatings obtained by powder laser cladding. Archives of Metallurgy and Materials. 62(2), 531-538.http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000406180900010&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=b7bc2757938ac7a7a821505f8243d9f3[8] Sahoo, Ch.K., Soni, L. & Masanta, M. (2016). Evaluation of microstructure and mechanical properties of TiC/TiC-steel composite coating produced by gas tungsten arc (GTA) coating process. Surface & Coatings Technology. 307, 17-27.[9] Piątkowski, J., Grabowski, A. & Czerepak, M. (2016). The Influence of Laser Surface Remelting on the Microstructure of EN AC-48000 Cast Alloy. Archive of Foundry Engineering. 16(4), 217-221.[10] Wrońska, A. & Dudek, A. (2014). Characteristics of surface layer of sintered stainless steels after remelting using GTAW method. Archives of Civil and Mechanical Engineering. 14(3), May, 425-432.

Journal

Archives of Foundry Engineering – de Gruyter

Published: Dec 20, 2017

References

  • Reinforcing cast iron with composite insert of and
    Dulska
  • Effect of compaction pressure aplied to TiC reactants on the Microstructure and Properties of Composite Zones Produced in situ in steel castings Material XV
    Olejnik
  • Characterization of in situ synthesized TiC particle reinforced Fe - based composite coatings produced by multipass overlapping GTAW melting process Surface and Coatings Technology
    Wang
  • Composite zones obtained by in situ synthesis in steel castings of and
    Olejnik
  • and mechanical study of tungsten carbide composite coatings obtained by powder laser cladding of and
    Huebner