Access the full text.
Sign up today, get DeepDyve free for 14 days.
P. Monka, K. Monkova, V. Modrák, S. Hric, P. Pastucha (2019)
Study of a tap failure at the internal threads machiningEngineering Failure Analysis
Jakub Kaščak, Monika Telišková, Jozef Török, Petr Baron, J. Zajac, Jozef Husár (2019)
Implementation of Augmented Reality into the Training and Educational Process in Order to Support Spatial Perception in Technical Documentation2019 IEEE 6th International Conference on Industrial Engineering and Applications (ICIEA)
P. Božek, P. Pokorný, J. Svetlík, A. Lozhkin, I. Arkhipov (2016)
The calculations of Jordan curves trajectory of the robot movementInternational Journal of Advanced Robotic Systems, 13
A. Panda, Štefánia Olejárová, J. Valícek, M. Harničárová (2018)
Monitoring of the condition of turning machine bearing housing through vibrationsThe International Journal of Advanced Manufacturing Technology, 97
H. Alavi, P. Hąbek (2016)
Addressing Research Design Problem in Mixed Methods ResearchManagement Systems in Production Engineering, 21
P. Polák, R. Drlička, J. Žitňanský (2014)
CAPABILITY ASSESSMENT OF MEASURING EQUIPMENT USING STATISTIC METHODManagement Systems in Production Engineering
A. Panda, K. Dyadyura, J. Valícek, M. Harničárová, J. Zajac, V. Modrák, I. Pandová, P. Vrabel, Ema Nováková-Marcinčínová, Z. Pavelek (2017)
Manufacturing Technology of Composite Materials—Principles of Modification of Polymer Composite Materials Technology Based on PolytetrafluoroethyleneMaterials, 10
I. Kovač, R. Mikuš, R. Drlička, J. Žitňanský (2013)
Boron Effect on Mechanical Properties and Structure of Steel STN 41 5230 Surface LayerAdvanced Materials Research, 801
W. Biały, J. Ružbarský (2018)
Breakdown Cause and Effect Analysis. Case StudyManagement Systems in Production Engineering, 26
Goran Kovacic, Živko Kondić (2012)
Statistical analysis of stretch film production process capabilities, 6
J. Svetlík, P. Demec (2013)
Principles of Modular Architecture in the Manufacturing TechnologyApplied Mechanics and Materials, 309
(2011)
Melt Flow Behaviour of Composite Materials with Natural Animal Fillers
David de-Felipe, Ernest Benedito (2017)
Monitoring high complex production processes using process capability indicesThe International Journal of Advanced Manufacturing Technology, 93
Kuo-Ping Lin, Chunjun Yu, Kuen-Suan Chen (2019)
Production data analysis system using novel process capability indices-based circular economyInd. Manag. Data Syst., 119
T. Holota, J. Hrubec, M. Kotus, Mária Holiencinová, Eva Čapošová (2016)
The management of quality costs analysis modelSerbian Journal of Management, 11
D. Dupláková, L. Knapčíková, M. Hatala, Erik Szilágyi (2016)
Mathematical Modeling of Temperature Characteristics of RFID Tags with their Subsequent Application in Engineering Production
Petr Baron, M. Kočiško, Lukáš Blaško, Patrik Szentivanyi (2017)
Verification of the operating condition of stationary industrial gearbox through analysis of dynamic signal, measured on the pinion bearing housingMeasurement, 96
J. Torok, M. Kočiško, M. Telíšková, M. Janák (2016)
Increasing of the Work Productivity of CMM Machine by Applying of Augmented Reality Technology, 68
Chakaphan Ngaowthong, Martin Borůvka, L. Běhálek, Petr Lenfel, M. Švec, R. Dangtungee, S. Siengchin, S. Rangappa, Jyotishkumar Parameswaranpillai (2019)
Recycling of sisal fiber reinforced polypropylene and polylactic acid composites: Thermo-mechanical properties, morphology, and water absorption behavior.Waste management, 97
AbstractThe article deals with the assessment of production process capability in the serial production of plastic components. The plastic component was used for analysis. Component is used in the automotive industry in car suspension shock absorbers. Assessing the capability of the product’s manufacturing process is very important. The aim of the present paper is to measure the dimensional characteristics of a thermoplastic product as a monitored quality feature. The analyzed product is manufactured in an eightfold injection mold by injection technology. The products from each injection mold cavity were considered separately. Process capability was assessed using capability indices. Process variability and centering were evaluated. Based on the analysis we can say that the production process is in excellent condition.
Management Systems in Production Engineering – de Gruyter
Published: Dec 1, 2019
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.