Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/de-gruyter/analysis-of-components-effecting-free-convection-intensity-in-steel-uDU01IorQP
References (14)
-
(1998)
Modelling of steady free convection in two-dimensional enclosed space -
W. Antwerpen, C. Toit, P. Rousseau (2010)
A review of correlations to model the packing structure and effective thermal conductivity in packed beds of mono-sized spherical particlesNuclear Engineering and Design, 240
-
P. Dietz (1979)
Effective Thermal Conductivity of Packed BedsIndustrial & Engineering Chemistry Fundamentals, 18
-
(2014)
Effective thermal conductivity as a basic thermal property of steel porous charge -
R. Wyczółkowski, D. Musiał (2013)
The experimental study of natural convection within the space of a bundle of rectangular sectionsExperimental Thermal and Fluid Science, 51
-
Y. Jaluria (1980)
Natural Convection: Heat and Mass Transfer -
Yeong Yeo (2018)
Heat TransferFinite Element Method for Solids and Structures
-
A. Sverdlin, A. Ness (2006)
3 Fundamental Concepts in Steel Heat Treatment -
A. Bejan (1984)
Convection Heat Transfer -
(2012)
Classification and characterization of porous charges found in the industrial heat treatment practice -
R. Wyczółkowski, D. Musiał (2012)
Experimental tests for the occurence of convective heat transfer within the bed of rectangular steel profilesArchives of Thermodynamics, 33
-
G. Naterer, Lea-Der Chen (2002)
Heat Transfer in Single and Multiphase Systems -
M. Kaviany (1991)
Principles of heat transfer in porous media -
R. Wyczółkowski (2014)
Analysis of The Rayleigh Number in the Area of Steel Rectangular Sections in the Conditions of Stedy and Unstedy Heat Flow/ Analiza Liczby Rayleigha W Obszarze Stalowych Profili Prostokątnych W Warunkach Ustalonego I Nieustalonego Przepływu CiepłaCivil And Environmental Engineering Reports, 14
- Publisher
- de Gruyter
- Copyright
- Copyright © 2015 by the
- ISSN
- 2083-6023
- eISSN
- 2083-6023
- DOI
- 10.1515/aoter-2015-0024
- Publisher site
- See Article on Publisher Site
Abstract
Abstract Free convection is one of the heat transfer modes which occurs within the heat-treated bundles of steel rectangular section. A comprehensive study of this phenomenon is necessary for optimizing the heating process of this type of charge. The free convection intensity is represented by the Rayleigh number Ra. The value of this criterion depends on the following parameters: the mean section temperature, temperature difference within the section, kinematic coefficient of viscosity, volume expansion coefficient and the Prandtl number. The paper presents the analysis of the impact of these factors on free convection in steel rectangular sections. The starting point for this analysis were the results of experimental examinations. It was found that the highest intensity of this process occurs for the temperature of 100 °C. This is mainly caused by changes in the temperature difference observed in the area of sections and changes in kinematic coefficient of viscosity of air. The increase in the value of the Rayleigh number criterion at the initial stage is attributable to changes in the parameter of temperature difference within the section. After exceeding 100 °C, the main effect on convection is from changes in air viscosity. Thus, with further increase in temperature, the Rayleigh number starts to decline rapidly despite further rise in the difference in temperature.
Journal
Archives of Thermodynamics – de Gruyter
Published: Sep 1, 2015