Access the full text.
Sign up today, get DeepDyve free for 14 days.
W. Feist (1977)
Finishing Wood for Exterior Applications—Paints, Stains, and Pretreatments
(1978)
Comparison of outdoor and accelerated weathering of unprotected softwoods
A. Davis, D. Sims (1983)
Weathering of polymers
(1964)
Tensile strength behaviour äs a function of cellulose in wood
J. Marian, A. Wissing (1960)
The chemical and mechanical deterioration of wood in contact with iron. Part 1. Mechanical deterioration. Part 2. Chemical decomposition. Part 3. Effect of some wood preservatives. Part 4. Prevention of deterioration.Svensk Papperstidning-nordisk Cellulosa, 63
(1979)
BS5666: part 3: 1979
(1978)
Comparison of outdoor and accel
(1960)
The chemical and mechanical deterioration of wood in contact with iron . Part l , Mechanical deterioration
(1967)
Clear finishes for exterior wood, field exposure tests
A. Pizzi (1980)
Wood waterproofing and lignin crosslinking by means of chromium trioxide/guajacyl units complexesJournal of Applied Polymer Science, 25
G. Davidson (1941)
10—THE PROGRESSIVE OXIDATION OF COTTON CELLULOSE BY CHROMIC ACID OVER A WIDE RANGE OF OXYGEN CONSUMPTIONJournal of The Textile Institute Transactions, 32
A. Williams (1972)
The use of atomic-absorption spectrophotometry for the determination of copper, chromium and arsenic in preserved woodAnalyst, 97
Introduction Wood exposed to the weather undergoes rapid superficial degradation due principally to the effects of light and water. Although paints and varnishes are used to ameliorate the effects of weathering, some degradation of the wood Substrate may occur beneath substantially intact surface coatings. For example, the transmission of light in the visible spectrum through clear finishes may result in photodegradation of wood (Derbyshire and Miller 1981). Similarly, uptake of water through imperfections in opaque coatings may result in hydrolytic degradation of wood with prolonged exposure (Evans and Banks 1988). -Since finishes applied to pre-weathered wood surfaces are rapidly degraded (Ashton 1967) it is thought that superficial degradation of wood is an important factor limiting the life of surface coatings applied to wood. Accordingly, application of chemical pre-treatments which stabilize wood surfaces against the deleterious effects of light and water may be a means of increasing the life of coatings applied subsequently. Application of dilute aqueous Solutions of inorganic metal comHolzforschung / Vol. 43 /1989 / No. 5 Copyright © 1989 Walter de Gruyter · Berlin · New York pounds to wood surfaces are reported to reduce microscopic cell wall checking in wood caused by irradiation with ultraviolet
Holzforschung - International Journal of the Biology, Chemistry, Physics and Technology of Wood – de Gruyter
Published: Jan 1, 1989
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.