H. Tabbara, S. Gu, D. McCartney, T. Price, P. Shipway (2011)
Study on Process Optimization of Cold Gas SprayingJournal of Thermal Spray Technology, 20
H. Katanoda, M. Fukuhara, N. Iino (2007)
Numerical Study of Combination Parameters for Particle Impact Velocity and Temperature in Cold SprayJournal of Thermal Spray Technology, 16
Wen-ya Li, H. Liao, Hongtao Wang, Chang-jiu Li, G. Zhang, C. Coddet (2006)
Optimal Design of a Convergent-Barrel Cold Spray Nozzle by Numerical MethodInternational Thermal Spray Conference
Wen-ya Li, Chao Zhang, Xueping Guo, G. Zhang, H. Liao, C. Coddet (2007)
Deposition Characteristics of Al-12Si Alloy Coating Fabricated by Cold Spraying with Relatively Large Powder ParticlesInternational Thermal Spray Conference
H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye (2003)
Bonding mechanism in cold gas sprayingActa Materialia, 51
Chang-jiu Li, Wen-ya Li (2003)
Deposition characteristics of titanium coating in cold sprayingSurface & Coatings Technology, 167
T. Steenkiste, John Smith, R. Teets (2002)
Aluminum coatings via kinetic spray with relatively large powder particlesSurface & Coatings Technology, 154
B. Samareh, A. Dolatabadi (2007)
A Three-Dimensional Analysis of the Cold Spray Process: The Effects of Substrate Location and ShapeJournal of Thermal Spray Technology, 16
T. Jen, Longjian Li, Wenzhi Cui, Qinghua Chen, Xin-ming Zhang (2005)
Numerical investigations on cold gas dynamic spray process with nano- and microsize particlesInternational Journal of Heat and Mass Transfer, 48
M. Grujicic, C. Zhao, C. Tong, W. DeRosset, D. Helfritch (2004)
Analysis of the impact velocity of powder particles in the cold-gas dynamic-spray processMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 368
Shuo Yin, Xiaofang Wang, Wenya Li, Yue Li (2012)
Numerical Study on the Effect of Substrate Size on the Supersonic Jet Flow and Temperature Distribution Within the Substrate in Cold SprayingJournal of Thermal Spray Technology, 21
R. Lupoi, W. O'Neill (2011)
Powder stream characteristics in cold spray nozzlesSurface & Coatings Technology, 206
X. Suo, Xueping Guo, Wenya Li, M. Planche, R. Bolot, H. Liao, Christian Codde (2011)
Preparation and characterization of magnesium coating deposited by cold sprayingJournal of Materials Processing Technology, 212
A. Alkhimov, V. Kosarev, S. Klinkov (2001)
The features of cold spray nozzle designJournal of Thermal Spray Technology, 10
J. Pattison, S. Celotto, A. Khan, W. O'Neill (2008)
Standoff distance and bow shock phenomena in the Cold Spray processSurface & Coatings Technology, 202
H. Lee, S. Jung, Soo Lee, Y. You, K. Ko (2005)
Correlation between Al2O3 particles and interface of Al–Al2O3 coatings by cold sprayApplied Surface Science, 252
B. Jodoin, F. Raletz, M. Vardelle (2006)
Cold spray modeling and validation using an optical diagnostic methodSurface & Coatings Technology, 200
A. Sova, A. Papyrin, I. Smurov (2009)
Influence of Ceramic Powder Size on Process of Cermet Coating Formation by Cold SprayJournal of Thermal Spray Technology, 18
R. Dykhuizen, M. Smith (1998)
Gas dynamic principles of cold sprayJournal of Thermal Spray Technology, 7
Wen-ya Li, H. Liao, G. Douchy, C. Coddet (2007)
Optimal design of a cold spray nozzle by numerical analysis of particle velocity and experimental validation with 316L stainless steel powderMaterials & Design, 28
Shuo Yin, Xiaofang Wang, Wenya Li (2011)
Computational analysis of the effect of nozzle cross-section shape on gas flow and particle acceleration in cold sprayingSurface & Coatings Technology, 205
T. Steenkiste, John Smith, R. Teets, J. Moleski, D. Gorkiewicz, R. Tison, D. Marantz, K. Kowalsky, W. Riggs, P. Zajchowski, B. Pilsner, R. Mccune, K. Barnett (1999)
Kinetic spray coatingsSurface & Coatings Technology, 111
Surface and Coatings Technology – CrossRef
Published: Apr 1, 2013
Access the full text.
Sign up today, get DeepDyve free for 14 days.