TY - JOUR
AU - 
AB - Journal of Mechatronics and Robotics Review Relly Victoria Virgil Petrescu ARoTMM-IFToMM, Bucharest Polytechnic University, Bucharest, (CE), Romania Article history Abstract: With the evolution of technology, the construction and Received: 27-07-2020 geometry of the piston, together with the materials from which it is made, Revised: 15-08-2020 as well as the related manufacturing technologies, have been continuously Accepted: 18-08-2020 improved. Thus, modern engines have become less polluting, working at higher temperatures and pressures. Body aerodynamics have been Email: rvvpetrescu@gmail.com improved, leading to lower resistance forces from the air. Also, the internal losses of the engines, generated by friction, as well as those at the level of the tire-road interface were diminished. All these improvements to motor vehicles have led to a proportional decrease in native braking capacity. Moreover, this decrease is evident in tonnage vehicles, which are disadvantaged in terms of the small contact area of the friction elements in conventional braking systems. For these reasons as well as due to the attempts to coordinate the platoon of cars, the decrease of the fuel consumption, the increase of the safe speed of movement resulted in the necessity of the development of new auxiliary braking systems, or the improvement of the already 
TI - Mechatronic Systems to the Braking Mechanisms
JF - Journal of Mechatronics and Robotics
DO - 10.3844/jmrsp.2020.156.190
DA - 2020-01-01
UR - https://www.deepdyve.com/lp/unpaywall/mechatronic-systems-to-the-braking-mechanisms-vtM3W0WuiP
DP - DeepDyve
ER -