TY - JOUR
AU - 
AB - In this paper, we proposed and implemented a GUI-based system to recognize and record measured values of digital instruments in the industrial site through image processing. Unlike the existing vehicle license plate recognition system, the measured values of the measuring instrument are displayed on the LCD screen as digital numbers. So, the proposed system considers the decimal point, a negative sign, light reflected by LCD protective glass, and various disturbance factors. We used blob-labeling technique to recognize the numbers displayed on the LCD screen, the recognized number images were determined as certain numbers through the template matching, and recognized values were recorded in the storage device with measurement time. Therefore, the proposed system in this paper would reduce the burden of writing when recording the measured values of the inside/outside diameter or height of the product in the industrial site, so effective and errorless process management in production process is possible by preventing errors in recording measurements when written by hand. Key word : Image processing, Digital number, Number recognition, GUI, Blob-labeling, Template matching. http://dx.doi.org/10.12673/jant.2016.20.5.496 Received 10 October 2016; Revised 5 October 2016 Accepted (Publication) 18 October 2016 (30 October 2016) This is an Open Access article distributed under 
TI - A GUI-based the Recognition System for Measured Values of Digital Instrument in the Industrial Site
JO - The Journal of Advanced Navigation Technology
DO - 10.12673/jant.2016.20.5.496
DA - 2016-10-30
UR - https://www.deepdyve.com/lp/unpaywall/a-gui-based-the-recognition-system-for-measured-values-of-digital-tHk7ENtCN1
DP - DeepDyve
ER -