TY - JOUR
AB - Contents Cover: Thromboelastography (TEG) measures the clot time and tensile strength of blood samples. TEG cups and pins were modified with 4 distinct PECVD coatings to analyze mechanisms of blood plasma coagulation through the contact pathway. Only carboxylated anionic surfaces produced a faster and highly controlled clot kinetics compared to the bare commercial Cyrolite methacrylate polymer. Further details can be found in the article by Caroline Hoemann et. al. on page 817. Full Papers The concentration of the COOH groups Structure of Plasma-Deposited measured by XPS as well as by FTIR Copolymer Films Prepared from X ( molar fraction of acrylic acid) correlates with each other. This means Acrylic Acid and Styrene: Part II the concentration of COOH on the surface Variation of the Comonomer and in the bulk increases proportional with Ratio increasing fraction of acrylic acid in pre- cursor mixture. This point also indicates to A. Fahmy, R. Mix, A. Scho ¨nhals, the regularity of films. J. Friedrich* Plasma Process. Polym. 2013, 10, 750–760 Regression coefficient: 0.99 0 123 XPS -COOH % Ar plasma treatments can induce a repta- Reptation Aggregation of Liquid tion aggregation in the liquid silicone oils. Silicon Oils Modified by Ar The reptation 
TI - Plasma Process. Polym. 9∕2013
JF - Plasma Processes and Polymers
DO - 10.1002/ppap.201370027
DA - 2013-01-01
UR - https://www.deepdyve.com/lp/wiley/plasma-process-polym-9-2013-seKNP0oKJ0
SP - 747
EP - 749
VL - 10
IS - 9
DP - DeepDyve
ER -