TY - JOUR
AB - International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-4, November 2019 A Low Input Referred Noise Dynamic Comparator for High Speed Applications D Pavan kumar Sharma, P.Sreehari Rao  transistors M7 and M6 are turned on[4]. This phase of Abstract: Comparators play a pivotal role in design of analog operation is reset phase. Nodes Voutp and Voutn are now pre and mixed signal circuits. Comparators employ regenerative charged to supply potential. In the next clock phase i.e. when feedback both in input pre-amplifier stage and output stage. The clk is high transistors M1, M8 and M9 begin to turn on and designed comparator resolves 5mV with resolution of 8 bits and draw current. The voltage stored across parasitic capacitance dissipates 11mW of power using 1.2V supply in 130nm CMOS present at the output nodes begins to change according to the technology while operating at clock frequency of 1.25 GHz. differential input voltage. After certain amount of time the Keywords : Dynamic comparator, offset voltage, kickback cross coupled pair start to operate until one of the transistor noise. turns off and other turns on completely[7]. This is the regenerative phase. There are certain problems associated I. INTRODUCTION 
TI - A Low Input Referred Noise Dynamic Comparator for High Speed Applications
JF - Regular Issue
DO - 10.35940/ijrte.d6881.118419
DA - 2019-11-30
UR - https://www.deepdyve.com/lp/unpaywall/a-low-input-referred-noise-dynamic-comparator-for-high-speed-riNpz8wrnI
DP - DeepDyve
ER -