TY - JOUR
AU1 - MOLYNEUX, L.
AB - TIME modulation, where information is conveyed by changing the time between similar parts of the modulated wave-train rather than by the frequency of occurrence, has a feature which is of great importance at the demodulation stage. This can best be demonstrated by considering a common method of de-modulating a frequency-modulated wave-train and comparing it with a method which is particularly simple to use where the wave-train is time-modulated. Fig. 1 shows a frequency modulated wave-train with a step change in frequency; a common and representative method of de-modulation is shown in Fig. 2. The box represents a device which produces a pulse of current (di) of short and controlled duration for each pulse of the input wave-train. The mean current flowing through R is, therefore, n × di where n is the pulse-recurrence frequency. The mean potential across R is n × di × R and is proportional to the mean value of the pulse frequency and hence represents the original modulation waveform. The value of c does not affect the mean value of current but has a marked effect on the transient performance of the circuit. If it is assumed that the current pulse has a negligible duration compared with the repetition frequency, then the waveform across the capacitor will be as shown in Fig. 1. The fall in potential between pulses is represented by the expression ν = V (ε–t/cR) where ν is the capacitor potential at any time t after an input pulse at which time ν = V. The potential of the capacitor, therefore, falls exponentially with time with a time constant given by the product of c and R. In most situations it is desirable to recover the original modulating waveform undisturbed by components of the carrier, and the difficulty is to choose c.R so that the carrier frequency components (ripple) are at an acceptable level while maintaining a good transient performance of the de-modulated waveform. Often a simple resistance–capacitance filter will not give sufficiently good performance and elaborate low-pass filters must be used. The filters have, up to the present, always used inductive elements which are not as convenient to use as resistive–capacitance components (they must in general be specially wound) and cannot be made in ‘integrated circuit’ form. (This method of construction involves making the components and their interconnexions at the same time, often on a common surface.)
TI - Important Feature of Time Modulation
JF - Nature
DO - 10.1038/209188a0
DA - 1966-01-08
UR - https://www.deepdyve.com/lp/springer-journals/important-feature-of-time-modulation-pL8d19EH7B
SP - 188
EP - 190
VL - 209
IS - 5019
DP - DeepDyve
ER -