TY - JOUR
AU - 
AB - http://dx.doi.org/10.5755/j01.eee.19.6.1902 ELEKTRONIKA IR ELEKTROTECHNIKA, ISSN 1392-1215, VOL. 19, NO. 6, 2013 On-line Partial Discharge Detection for High Voltage Rotating Machines Using Inductive Method 1,2 1 G. Dauksys , A. Jonaitis Department of Electric Power Systems, Kaunas University of Technology, Studentų St. 48, LT-51367 Kaunas, Lithuania Faculty of Electromechanics, Kaunas Technical College, Tvirtovės al. 35, LT-50155 Kaunas, Lithuania gediminas.dauksys@gmail.com insulation (dewy insulation or contaminated with impurities). Abstract—The solid insulations of electrical equipment are perpetually affected by various duration overvoltages. Electric Most dangerous partial discharges occur in liquid or solid stress of insulation depends on its thickness and amplitude of insulation voids and gaseous micro-layer junctions and applied voltage. The damaged solid insulation may also cracks, where the discharge processes occur at much weaker influence characteristic parameters of partial discharges. The than the electric fields in liquid or solid insulation. characteristic parameters of solid insulation quality should be permanently evaluated. II. METHODS OF PARTIAL DISCHARGES MEASUREMENTS Partial discharge monitoring provides reliable information necessary for basic maintenance of stator windings of motors Various methods can be used for partial discharges and generators. Submitted paper deals with partial discharge measurements in electric machines. Separate authors measurements in stator windings during the increasing of 
TI - On-line Partial Discharge Detection for High Voltage Rotating Machines Using Inductive Method
JF - Electronics and Electrical Engineering
DO - 10.5755/j01.eee.19.6.1902
DA - 2013-06-12
UR - https://www.deepdyve.com/lp/unpaywall/on-line-partial-discharge-detection-for-high-voltage-rotating-machines-kPsiDjL7PW
DP - DeepDyve
ER -