TY - JOUR
AU1 - Fridland, A.
AB - mounted on the supply panel A drum with the electric a 5 kw electric motor via a three-speed reducing gear; cable is located at the beginning of the inspection bed the second roller is free running. The arming mechanism and is not connected with the machine. is actuated by a 10 kw electric motor which transmits the rotary motion to the shaft via a worm gear of 1 : 60 gear ratio. The rotary motion from the cylindrical part of the shaft is transmitted through a clutch and a universal joint to the turning mechanism. In this way it is possible to transmit the rotary motion irrespective of the incli- nation angle of the grooved shaft. The turning apparatus consists of a grooved shaft and turning head (Fig. 2). The fork of the head engages the rail by means of a system of levers and then the rail is turned when the shaft rotates. The turning mechanism is designed in such a way that the engagement of the fork with the rail can be ef- -4 fected in any position of the rail (with the rail resting on its head or its foot or on edge). The appropriate position 
TI - Experience on making couplings from pipe
JF - Metallurgist
DO - 10.1007/BF00740173
DA - 2004-11-19
UR - https://www.deepdyve.com/lp/springer-journals/experience-on-making-couplings-from-pipe-jBX2Fux78h
SP - 263
EP - 264
VL - 3
IS - 6
DP - DeepDyve
ER -