TY - JOUR
AU - Trapeznikov, A.
AB - (UDC 621.771.2:621.798.3/.5) V. Shirinskii and A.Trapeznikov Novotipetsk Metallurgical Plant Translated from Metallurg, No. 4, p. 39, April, 1964 The No. 1 sheet-roiling shop of the Novolipetsk Metallurgical Plant widely uses a simple welding head (Fig. 1) for fastening bands when packaging bundles of sheet. 7 ~---!g~ "Z Fig. 1. Welding head: 1) Insert; 2) bushing; Fig. 2. Welding apparatus: 1) Welding head; 8) housing; 4) handle; 5) flux bunker; 6) shaft 2) insertion plate; 3) tightening machine; 4) iron of measuring device; 7) welding rod; 8) catch band; 5) bundle of sheets; 6) supports. for shaft of measuring device; 9) spring; 10) opening for cable. At the present time packaging is accomplished in the following manner: a bundle prepared for packaging is wrapped with a band and drawn tight. The band is overlapped where it is to be welded. An insertion plate(Fig. 2) is placed between the surface of the sheet of the bundle and the band to guard against welding. Welding takes 5-10 sec with the usual rod under fiux at 2 points. For welding the apparatus is set at the welding place, the welding rod is delivered, and by turning the handle the flux dose is supplied, 
TI - Welding head for packaging bundles of sheet
JF - Metallurgist
DO - 10.1007/BF00734311
DA - 2004-11-18
UR - https://www.deepdyve.com/lp/springer-journals/welding-head-for-packaging-bundles-of-sheet-glXP0yr6cG
SP - 202
EP - 202
VL - 8
IS - 4
DP - DeepDyve
ER -