TY - JOUR
AU - Maslennikov, S.
AB - DEVICE FOR WELDING FITTING DRIVE HANDkrHEELS UDC 621.757-229.3:621.791 S. N, Maslennikov The device developed in Heavy Industrial Fitting Aleksin Plant for welding fitting drive handwheels (Fig. I) consists of the stand i and the rotating base 2 located on it, on which are located the stationary 3 and movable 5 supports. In each of the sleeves of the sup- ports is located a rotating fork, on the shaft of which there are rotating rollers 4. The distance between the supports required for the diameter of the handwheel being welded is set with the crank 6, the screw 8, and the nut 7. Rotating the handwheel, the rim with the spokes and the hub is welded. As a result of the inlroduction of this device there has been a reduction in labor requirement and an improvement in working conditions for the welders. The saving from the introduction of this device into production was 1,000 rubles. ! i ~ I i Fig. I Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. l, p. 38, January, ]980. 0009-2355/80/0102-0077507.50 9 1981 Plenum Publishing Corporation 77 
TI - Device for welding fitting drive handwheels
JO - Chemical and Petroleum Engineering
DO - 10.1007/BF01420113
DA - 2005-03-21
UR - https://www.deepdyve.com/lp/springer-journals/device-for-welding-fitting-drive-handwheels-gIF3fG2QQN
SP - 77
EP - 77
VL - 16
IS - 1
DP - DeepDyve
ER -