TY - JOUR
AU - Barić, Adrijan
AB - This paper presents the design of a low-power voltage reference, bias current and the supply voltage for a 9-bit fully differential ADC. The references, power supply circuits and the ADC are integrated in one circuit, i.e. chip. The proposed chip is implemented in the UMC 0.18 μm CMOS process and occupies 800×700 μm2. The circuit supply voltage VDD is obtained from the external RF signal. When the circuit is active VDD is used as a supply for the rest of the circuitry. The circuit generates supply, reference voltages and currents when VDD exceeds the upper voltage level VHIGH ≈1.82 V. When VDD is lower than the lower voltage level VLOW ≈1.35 V, the circuit is off. When the circuit is active, the current consumption is 22 μA. The presented results are based on measurements.
TI - Design of low-power voltage/current references and supply voltage for 9-bit fully differential ADC
JF - Automatika
DO - 10.7305/automatika.2016.03.1616
DA - 2016-01-01
UR - https://www.deepdyve.com/lp/taylor-francis/design-of-low-power-voltage-current-references-and-supply-voltage-for-e5jbXdHtVU
SP - 239
EP - 251
VL - 57
IS - 1
DP - DeepDyve
ER -