TY - JOUR
AU - Bubnov, Yu.
AB - A UNIVERSAL DEVICE FOR HYDRAULIC TESTING OF TUBES UDC 62 Yu. A. Bubnov The existing methods of hydraulic tube testing are not very productive and require the use of manual labor. In the Dzerzhinskii Chemical-Engineering Plant we have worked out and introduced a universal device for hydraulic tube testing, in which sealing for hermeticity is carried out with the use of a ball surface. This makes it possible to carry out hydraulic testing at pressures up to 400 kgf/cm 2 on three tubes or more simul- taneously in parallel on two devices (the tested tubes are removed from one device and a new set of tubes is installed for hydraulic testing; hydraulic testing is carried out on the other device). The device (see Fig. 1) consists of two supports on which the base i is installed. This is made up of channel iron with channels for fastening the mobile clamp 2. The clamp consists of a pressure screw and a removable insert mounted in it, containing ball 8, which rotates freely in the insert but is fastened to prevent it from falling out. On the other end of the base is in- stalled immobile support 3, which has a 
TI - A universal device for hydraulic testing of tubes
JF - Chemical and Petroleum Engineering
DO - 10.1007/BF01157214
DA - 2005-01-29
UR - https://www.deepdyve.com/lp/springer-journals/a-universal-device-for-hydraulic-testing-of-tubes-dt0s2VVxPF
SP - 1075
EP - 1076
VL - 13
IS - 12
DP - DeepDyve
ER -