TY - JOUR
AU - 
AB - www.ijastech.org e-ISSN: 2587-0963 2021, VOL. 5, NO: 1, 106-115 1* Uğur Demir 0000-0001-7557-3637 Mechatronics Engineering Department, Faculty of Technology, Marmara University, Istanbul, 34710, Turkey Research Article https://doi.org/10.30939/ijastech..871619 Received 31.01.2021 Revised 10.03.2021 Accepted 17.03.2021 * Corresponding author Uğur Demir udemir@marmara.edu.tr Address: Mechatronics Engineering De- partment, Faculty of Technology, Mar- mara University, Istanbul, 34710, Turkey Tel:+ 905344787370 1. Introduction mechanism is located on the door and can move between locked and open positions. A single motor on the door is connected by the Due to user demands and ease of use, the most used door types power drive system and the locking mechanism. The power drive are conventional (mechanisms that allow movement to the outside system, thereby moving the sliding door along with the slide in or inside by rotating around an angle with a hinge) and sliding open and closed positions. The motor ensures that the lock mech- doors. Today’s technological developments create the need for anism is in the locked position when the power drive system moves electrically controlled sliding door systems especially in light and the sliding door to the closed position [2]. heavy commercial vehicles for service purposes [1]. A view of a The literature and patent 
TI - Design and Prototyping of Powered Sliding Door for Light Commercial Vehicles
JO - International Journal of Automotive Science And Technology
DO - 10.30939/ijastech..871619
DA - 2021-06-30
UR - https://www.deepdyve.com/lp/unpaywall/design-and-prototyping-of-powered-sliding-door-for-light-commercial-cKDKlu0DL0
DP - DeepDyve
ER -