TY - JOUR
AU1 - Deng, Shejun
AU2 - Yuan, Yingying
AU3 - Wang, Yong
AU4 - Wang, Haizhong
AU5 - Koll, Charles
AB - Introduction With the development of e-commerce and continuous improvement of global living standards, the surge in the demand for consumer product delivery has led to increasingly complex logistics networks. Such demand is difficult to accommodate with existing logistics resources, especially during major festivals and events. In 2009 when Alibaba launched the Double Eleven Shopping Festival, the number of parcels delivered was approximately 260,000; in 2019, the number was 1.292 billion, a 5000-fold increase [1]. In response to this situation, logistics enterprises should adopt effective resource sharing and collaborative mechanisms to reduce the occurrence of delayed delivery, damage, or missing packages during the delivery process. The traditional multi-depot vehicle routing problem (MDVRP) was proposed to address the situation where a large number of customers are served by multiple depots through a series of vehicles, which aims to optimize the complex structure of logistics networks [2, 3]. Unfortunately, with increasing customer demands, combined with rising transportation costs and limited logistics resources, the disadvantages of independent operation of distribution centers (DCs) are impossible to overlook. Collaboration among DCs enables vehicles to achieve reasonable resource sharing among multiple DCs and service periods [4]. The study of CMDVRP aims to identify and validate a collaborative mechanism among DCs to reduce the total cost of multicenter logistics distribution through collaboration, and thus improve the overall operational efficiency of the logistics network. The optimization problem of collaborative multicenter logistics delivery networks based on resource sharing (CMCLDN-RS) is a logical extension of CMDVRP. It considers resource sharing within and across service periods and can seek to find a collaborative mechanism involving different resource sharing schemes for logistics networks to reduce total operational costs, which effectively improves the reliability and stability of the logistics network. In this study, a collaborative mechanism is designed to promote the efficiency of a multicenter logistics delivery network. The mechanism considers various resource sharing schemes to reduce total operational costs. A bi-objective integer programming model based on the most suitable resource sharing schemes is developed to minimize the total logistics operational costs and number of vehicles. An adaptive grid particle swarm optimization (AGPSO) algorithm integrated with customer clustering is uniquely created to address the CMCLDN-RS problem. The elite iteration process is incorporated into the improved hybrid algorithm, which enhances the local and global search capabilities of the algorithm. By comparing different profit allocation schemes, the proposed profit allocation strategy and orders that DCs join a collaborative alliance are considered during the process of finding a stable collaborative alliance based on vehicle sharing among different service periods. The remaining sections of this paper are organized as follows. In Section 2, related literature is reviewed. In Section 3, the problem of CMCLDN-RS is stated and explained in detail. In Section 4, a bi-objective mixed-integer linear programing model based on resource sharing is established for CMCLDN-RS to minimize total logistics operational costs. In Section 5, an improved MOPSO algorithm is proposed to obtain the optimal route for serving customers. In Section 6, a case study is conducted to test the applicability to CMCLDN-RS. In Section 7, remarks and directions for future research are suggested. Literature review The collaborative multicenter delivery logistics network optimization with resource sharing is a further discussion of the research for traditional MDVRP with time windows (MDVRPTW) and collaborative logistics network optimization. It considers the synergy among participants with the basis of MDVRPTW. Related research for collaborative MDVRPTW is illustrated in Subsection 2.1, MDVRP optimization with resource sharing is presented in Subsection 2.2, relevant solution methods and objectives for CMCVRP-RS are shown in Subsection 2.3, and profit allocation in collaborative logistics networks is proposed in Subsection 2.4. Collaborative MDVRPTW Traditional MDVRPTW aims to find optimal routes for serving a set of customers with different requests under time windows among multiple depots [5–7]. The collaboration between different depots is considered to achieve resource sharing in collaborative MDVRPTW. Nadarajah and Bookbinder [8] suggested integrating trucks into the collaborative depots to avoid situations in which the trucks were traveling with less than full loads. Wang et al. [9] optimized a collaborative distribution network to obtain oil distribution routes efficiently, which minimized the total operating cost to solve the half open MDVRP. Li et al. [10] proposed that depots could form alliances to exchange transportation requests in a collaborative logistics network, which maximizes the total profit in MDVRPTW. Vaziri et al. [11] focused on the collaboration between multiple depots serving customers with different commodity requirements and developed a mixed-integer programming model to solve MDVRPTW. Previous studies on collaborative MDVRPTW have demonstrated the benefits of cooperation, but collaborative approaches can be diverse. MDVRP optimization with resource sharing MDVRP optimization is an important component of the entire logistics network optimization process, and transportation resource sharing has been considered in many studies [12]. Lin [13] coordinated transportation resources to improve the efficiency of the pickup and delivery logistics network, and was able to increase the benefits and usage of vehicles. Liu et al. [2] considered vehicle sharing in a collaborative network to tackle a multi-depot capacitated vehicle routing problem. Wen and Sun [14] proposed to optimize collaborative transport by sharing fleets. Fernandez et al. [15] promoted the collaboration among depots to serve shared customers, which reduced the overall logistics operational cost. Cortes and Suzuki [16] considered transportation resource sharing of certain customers in the delivery process and obtained 10% cost savings due to the consolidation of different vehicles. In a collaborative logistics network, constructing proper models for optimizing the network with a basis of resource sharing is essential [17, 18]. Lyu et al. [19] established a mathematical model which considered vehicle capacity sharing to optimize the transportation operations in a collaborative logistics network. Neves-Moreira et al. [20] developed a novel mathematical model for the freight transportation problem, which aimed to ensure resource synchronization among multiple nodes. Guajardo et al. [21] proposed a mixed-integer linear programming model to minimize the total transportation costs in solving the collaborative alliance configuration problem. Chen et al. [22] considered logistics resource sharing and presented a collaborative model based on the vehicle routing problem. Although collaboration among centers has been considered in many studies, knowledge gaps still remain in simultaneous sharing of multiple resources. Related solution methods and objectives for CMCVRP-RS The research to solve the corresponding problems provides a reference for studying MCVRP in a collaborative network based on resource sharing [18, 23]. Relevant solution methods and objectives for CMCVRP-RS are shown in Table 1. The acronyms of relevant research are defined as follows: PDPTW: Pickup and delivery problem with time windows GLNC: Global logistics network configurations CLN: Collaborative logistics network CSCL: Coalition structure in collaborative logistics CLNO: Collaborative logistics network optimization MDVRP: Multi-depot vehicle routing problem MDVRPTW: Multi-depot vehicle routing problem with time windows LCT: Logistics collaboration considering trust CCDP: Carrier collaboration decision-making problem MDVTRSP: Multi-depot vehicle type rescheduling problem CVRP: Collaborative vehicle routing problem with resource sharing Download: PPT PowerPoint slide PNG larger image TIFF original image Table 1. Comparison of relevant solution methods and objective functions for CMCVRP-RS. https://doi.org/10.1371/journal.pone.0242555.t001 Clustering algorithms are often employed before solving the vehicle routing problem to reduce computational complexity [32]. To solve MDVRP, Yücenur and Demirel [3] proposed a genetic algorithm based on clustering and indicated that the clustering component provided good performance. Reed et al. [33] used k-means clustering to cluster nodes and optimize the logistics network, which improved the efficiency of obtaining optimal solutions. Gao et al. [34] employed a k-means algorithm to solve the location of depots and surrounding cities for a location allocation problem. Defryn and Sörensen [35] grouped customers into multiple clusters; by doing so, vehicles could be reasonably allocated to each cluster. Praveen et al. [36] proposed a new clustering algorithm for effectively mining data, which laid the foundation for further optimization of vehicle routes. Heuristic algorithms are often used to solve the vehicle routing problem [37, 38], parameter selection optimization [39, 40], and multi-objective optimization problems [41–43]. For example, Dondo et al. [44] developed a mixed-integer linear programming model to solve a large-scale MDVRPTW and then utilized an improved hybrid local search algorithm to obtain feasible routes. Ferdinand et al. [45] presented a heuristic genetic algorithm to solve the pickup and delivery problem with consideration of resource sharing among different logistics providers. Wang and Kopfer [46] connected multiple carriers so that they could respond to different transportation requests, and a heuristic algorithm was presented to solve the centralized vehicle routing problem. Bae and Moon [28] proposed a heuristic algorithm and a genetic algorithm for MDVRPTW, which aimed to minimize the fixed and travel costs of depots. Li et al. [7] proposed an improved ant colony optimization algorithm to solve the MDVRP. Lv et al. [41] proposed a surrogate-assisted particle swarm optimization (PSO) algorithm with Pareto active learning for multi-objective optimization problems. Sedighizadeh and Mazaheripour [42] presented a hybrid algorithm combing the particle swarm optimization and the artificial bee colony algorithms to address multi-objective vehicle routing problems. Profit allocation in collaborative logistics networks In a collaborative logistics network, establishing a collaborative mechanism is critical. Benefits arising from collaboration need to be reasonably split among participants. A fair profit allocation strategy is important for the stability of the logistics network. Cruijssen [47] first proposed the idea of supplier-initiated logistics operation to coordinate shippers and achieve equalities. Dai and Chen [48] addressed two issues in a collaborative logistics network, namely sharing of service requests and profit allocation, and compared the performance of different profit allocation mechanisms. Kumoi and Matsubayashi [49] proposed a cooperative game to analyze stable and fair profit allocations normatively to fairly allocate the profit of a grand coalition. A method based on cooperative game theory has been used to allocate additional profit and promote the participation of consumers in a distributed energy network [50]. Yu et al. [51] calculated the exact Shapley value to distribute profit generated in a collaborative pickup and delivery network. A game theoretic approach has been developed to maximize productivity while ensuring fair profit allocation in collaborative multi-echelon supply chains [52]. Wang et al. [53] proposed a cooperative strategy to minimize carbon emissions in pickup and delivery processes and designed a fair method of profit distribution based on cooperative game theory to stabilize alliances. In comparison with the aforementioned studies in the domain, the main contributions of this paper are listed in the following aspects: (1) it considers different types of resource sharing schemes, including sharing both within the same DC and across DCs to optimize a collaborative multicenter delivery network; (2) it establishes a bi-objective optimization model for the total operational cost and number of vehicles minimization based on resource sharing in multiple service periods; (3) it employs an AGPSO based on k-means customer clustering, which incorporates an efficient selective endowment mechanism and thus performs well in global and local research; and (4) it implements a real-world case study to evaluate the applicability of the proposed CMCLDN-RS model and approach, which contributes empirically to the literature on collaborative multi-echelon multi-period logistics network optimization, and then lays a foundation for the construction and sustainable development of intelligent transport systems. Problem statement The optimization of CMLDN can improve operational efficiency by using various resource sharing methods [54]. Fig 1 shows the changes in a logistics delivery network when logistics facilities agree to cooperate to achieve resource sharing. Customers can be redistributed among DCs based on the required time, type of service, and geographical locations for cooperative purposes to utilize resources. Transportation between DCs is accomplished by trucks, and vehicles are utilized to serve customers. Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 1. Illustration of the CMLDN-RS problem. https://doi.org/10.1371/journal.pone.0242555.g001 As shown in Fig 1A, before CMCLDN-RS optimization, the independent operation of DCs causes serious problems. Primarily, a large number of vehicles for delivery are used due to the different time demands of different customers. In addition, long-distance and cross deliveries not only make the network complex but also increase the delivery cost. These problems significantly reduce the delivery efficiency of the logistics network as a whole. Furthermore, the attributes of some products make them inconvenient to be delivered with other products, which causes a high cost for delivery. In Fig 1B, after CMCLDN-RS optimization, logistics facility resources, vehicle resources, and customer services are shared during the delivery process. Two types of resource sharing schemes are considered: internal vehicle sharing among different service periods, and vehicle sharing among DCs. In the optimized network, not only long-distance and cross deliveries are avoided, but network complexity is also reduced. With the assumption of $30 per unit time for delivery cost and $20 per unit time for penalty cost (earliness and delay penalties), Table 2 shows a comparison of non-collaborative and collaborative cases with the corresponding cost, number of vehicles, and service waiting times. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 2. Comparison before and after the CMCLDN-RS optimization. https://doi.org/10.1371/journal.pone.0242555.t002 Table 2 indicates that the central transportation cost, which is $143 in the first service period and $102 in the second, should be considered after CMCLDN-RS optimization. The delivery costs in the first and second service periods are $2610 and $1350 before CMCLDN-RS optimization and $1830 and $840 after, respectively. The total number of vehicles used for serving customers is 18 before CMCLDN-RS optimization and 11 after. The total service waiting time changes from 21 mins to 0, which is a reduction of 21 mins. The results show an obvious reduction in the total cost (from $4380 to $2915) and the number of vehicles (from 18 to 11) in the collaborative logistics network. That is, utilizing resource sharing can reduce the operational costs of the entire delivery network. Model formulation Two resource sharing schemes are considered in the optimization problem of CMCLDN-RS efficiently utilizing logistics resources. Trucks are shared between DCs, and shared vehicles are utilized to serve customers. To make CMCLDN-RS more realistic, several assumptions are illustrated as follows. Assumption 1: The demands of each customer are known and stable within each service period. Assumption 2: In the original logistics network, each DC operates independently. Assumption 3: Each DC pursues maximum profits. To formulate the CMCLDN-RS optimization problem into a mathematical model, the definitions used in the model are provided in Table 3. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 3. Symbols and description. https://doi.org/10.1371/journal.pone.0242555.t003 The CMCLDN-RS optimization model aims to minimize the total operational cost and number of vehicles of a collaborative multicenter delivery network, as shown in Eqs (1) and (2). (1)(2) TC1 is the cost for goods transportation. cπidkxπidk is the transportation cost among DCs, is the truck maintenance cost, Gdπydπ refers to the government subsidies when DC d joins an alliance, and and are the penalty costs for trucks. (3) TC2 is the cost for goods delivery within each DC. cπdcvxπdcv is the delivery cost for visiting customers served via closed delivery routes only by one DC, and are the penalty costs for vehicles in closed delivery routes, and is the vehicle maintenance cost. (4)) TC3 is the cost for goods delivery among DCs. cπdsvxπdsv is the delivery cost for visiting customers served via open delivery routes among DCs, and are the penalty costs for vehicles in open delivery, and is the vehicle maintenance cost. (5) Subject to: (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) (18) (19) (20) (21) (22) (23) (24) (25) (26) Constraints (6) and (7) ensure that each customer is served by only one DC. Constraints (8) and (9) guarantee that the delivery loads do not exceed the vehicle capacity. Constraint (10) ensures the conservation of goods flow for visiting customers served via internal vehicle sharing within each DC. Constraints (11) and (12) aim to eliminate the subtour in the delivery process. Constraint (13) guarantees that total customer demands do not exceed the DC capacity. Constraints (14) and (15) stipulate the delivery quantity from DC i to d, which is equivalent to the total change of customer quantities from DC i to d. Constraints (16) and (17) limit the arrival time of each vehicle for visiting customers served by internal vehicle sharing within each DC. Constraints (18) and (19) limit the arrival time of each vehicle for visiting customers served by vehicle sharing among DCs. Constraints (20) and (21) guarantee that each customer is served in their expected time windows. Constraints (22)–(26) are binary decision variables. Collaborative MDVRPTW Traditional MDVRPTW aims to find optimal routes for serving a set of customers with different requests under time windows among multiple depots [5–7]. The collaboration between different depots is considered to achieve resource sharing in collaborative MDVRPTW. Nadarajah and Bookbinder [8] suggested integrating trucks into the collaborative depots to avoid situations in which the trucks were traveling with less than full loads. Wang et al. [9] optimized a collaborative distribution network to obtain oil distribution routes efficiently, which minimized the total operating cost to solve the half open MDVRP. Li et al. [10] proposed that depots could form alliances to exchange transportation requests in a collaborative logistics network, which maximizes the total profit in MDVRPTW. Vaziri et al. [11] focused on the collaboration between multiple depots serving customers with different commodity requirements and developed a mixed-integer programming model to solve MDVRPTW. Previous studies on collaborative MDVRPTW have demonstrated the benefits of cooperation, but collaborative approaches can be diverse. MDVRP optimization with resource sharing MDVRP optimization is an important component of the entire logistics network optimization process, and transportation resource sharing has been considered in many studies [12]. Lin [13] coordinated transportation resources to improve the efficiency of the pickup and delivery logistics network, and was able to increase the benefits and usage of vehicles. Liu et al. [2] considered vehicle sharing in a collaborative network to tackle a multi-depot capacitated vehicle routing problem. Wen and Sun [14] proposed to optimize collaborative transport by sharing fleets. Fernandez et al. [15] promoted the collaboration among depots to serve shared customers, which reduced the overall logistics operational cost. Cortes and Suzuki [16] considered transportation resource sharing of certain customers in the delivery process and obtained 10% cost savings due to the consolidation of different vehicles. In a collaborative logistics network, constructing proper models for optimizing the network with a basis of resource sharing is essential [17, 18]. Lyu et al. [19] established a mathematical model which considered vehicle capacity sharing to optimize the transportation operations in a collaborative logistics network. Neves-Moreira et al. [20] developed a novel mathematical model for the freight transportation problem, which aimed to ensure resource synchronization among multiple nodes. Guajardo et al. [21] proposed a mixed-integer linear programming model to minimize the total transportation costs in solving the collaborative alliance configuration problem. Chen et al. [22] considered logistics resource sharing and presented a collaborative model based on the vehicle routing problem. Although collaboration among centers has been considered in many studies, knowledge gaps still remain in simultaneous sharing of multiple resources. Related solution methods and objectives for CMCVRP-RS The research to solve the corresponding problems provides a reference for studying MCVRP in a collaborative network based on resource sharing [18, 23]. Relevant solution methods and objectives for CMCVRP-RS are shown in Table 1. The acronyms of relevant research are defined as follows: PDPTW: Pickup and delivery problem with time windows GLNC: Global logistics network configurations CLN: Collaborative logistics network CSCL: Coalition structure in collaborative logistics CLNO: Collaborative logistics network optimization MDVRP: Multi-depot vehicle routing problem MDVRPTW: Multi-depot vehicle routing problem with time windows LCT: Logistics collaboration considering trust CCDP: Carrier collaboration decision-making problem MDVTRSP: Multi-depot vehicle type rescheduling problem CVRP: Collaborative vehicle routing problem with resource sharing Download: PPT PowerPoint slide PNG larger image TIFF original image Table 1. Comparison of relevant solution methods and objective functions for CMCVRP-RS. https://doi.org/10.1371/journal.pone.0242555.t001 Clustering algorithms are often employed before solving the vehicle routing problem to reduce computational complexity [32]. To solve MDVRP, Yücenur and Demirel [3] proposed a genetic algorithm based on clustering and indicated that the clustering component provided good performance. Reed et al. [33] used k-means clustering to cluster nodes and optimize the logistics network, which improved the efficiency of obtaining optimal solutions. Gao et al. [34] employed a k-means algorithm to solve the location of depots and surrounding cities for a location allocation problem. Defryn and Sörensen [35] grouped customers into multiple clusters; by doing so, vehicles could be reasonably allocated to each cluster. Praveen et al. [36] proposed a new clustering algorithm for effectively mining data, which laid the foundation for further optimization of vehicle routes. Heuristic algorithms are often used to solve the vehicle routing problem [37, 38], parameter selection optimization [39, 40], and multi-objective optimization problems [41–43]. For example, Dondo et al. [44] developed a mixed-integer linear programming model to solve a large-scale MDVRPTW and then utilized an improved hybrid local search algorithm to obtain feasible routes. Ferdinand et al. [45] presented a heuristic genetic algorithm to solve the pickup and delivery problem with consideration of resource sharing among different logistics providers. Wang and Kopfer [46] connected multiple carriers so that they could respond to different transportation requests, and a heuristic algorithm was presented to solve the centralized vehicle routing problem. Bae and Moon [28] proposed a heuristic algorithm and a genetic algorithm for MDVRPTW, which aimed to minimize the fixed and travel costs of depots. Li et al. [7] proposed an improved ant colony optimization algorithm to solve the MDVRP. Lv et al. [41] proposed a surrogate-assisted particle swarm optimization (PSO) algorithm with Pareto active learning for multi-objective optimization problems. Sedighizadeh and Mazaheripour [42] presented a hybrid algorithm combing the particle swarm optimization and the artificial bee colony algorithms to address multi-objective vehicle routing problems. Profit allocation in collaborative logistics networks In a collaborative logistics network, establishing a collaborative mechanism is critical. Benefits arising from collaboration need to be reasonably split among participants. A fair profit allocation strategy is important for the stability of the logistics network. Cruijssen [47] first proposed the idea of supplier-initiated logistics operation to coordinate shippers and achieve equalities. Dai and Chen [48] addressed two issues in a collaborative logistics network, namely sharing of service requests and profit allocation, and compared the performance of different profit allocation mechanisms. Kumoi and Matsubayashi [49] proposed a cooperative game to analyze stable and fair profit allocations normatively to fairly allocate the profit of a grand coalition. A method based on cooperative game theory has been used to allocate additional profit and promote the participation of consumers in a distributed energy network [50]. Yu et al. [51] calculated the exact Shapley value to distribute profit generated in a collaborative pickup and delivery network. A game theoretic approach has been developed to maximize productivity while ensuring fair profit allocation in collaborative multi-echelon supply chains [52]. Wang et al. [53] proposed a cooperative strategy to minimize carbon emissions in pickup and delivery processes and designed a fair method of profit distribution based on cooperative game theory to stabilize alliances. In comparison with the aforementioned studies in the domain, the main contributions of this paper are listed in the following aspects: (1) it considers different types of resource sharing schemes, including sharing both within the same DC and across DCs to optimize a collaborative multicenter delivery network; (2) it establishes a bi-objective optimization model for the total operational cost and number of vehicles minimization based on resource sharing in multiple service periods; (3) it employs an AGPSO based on k-means customer clustering, which incorporates an efficient selective endowment mechanism and thus performs well in global and local research; and (4) it implements a real-world case study to evaluate the applicability of the proposed CMCLDN-RS model and approach, which contributes empirically to the literature on collaborative multi-echelon multi-period logistics network optimization, and then lays a foundation for the construction and sustainable development of intelligent transport systems. Problem statement The optimization of CMLDN can improve operational efficiency by using various resource sharing methods [54]. Fig 1 shows the changes in a logistics delivery network when logistics facilities agree to cooperate to achieve resource sharing. Customers can be redistributed among DCs based on the required time, type of service, and geographical locations for cooperative purposes to utilize resources. Transportation between DCs is accomplished by trucks, and vehicles are utilized to serve customers. Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 1. Illustration of the CMLDN-RS problem. https://doi.org/10.1371/journal.pone.0242555.g001 As shown in Fig 1A, before CMCLDN-RS optimization, the independent operation of DCs causes serious problems. Primarily, a large number of vehicles for delivery are used due to the different time demands of different customers. In addition, long-distance and cross deliveries not only make the network complex but also increase the delivery cost. These problems significantly reduce the delivery efficiency of the logistics network as a whole. Furthermore, the attributes of some products make them inconvenient to be delivered with other products, which causes a high cost for delivery. In Fig 1B, after CMCLDN-RS optimization, logistics facility resources, vehicle resources, and customer services are shared during the delivery process. Two types of resource sharing schemes are considered: internal vehicle sharing among different service periods, and vehicle sharing among DCs. In the optimized network, not only long-distance and cross deliveries are avoided, but network complexity is also reduced. With the assumption of $30 per unit time for delivery cost and $20 per unit time for penalty cost (earliness and delay penalties), Table 2 shows a comparison of non-collaborative and collaborative cases with the corresponding cost, number of vehicles, and service waiting times. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 2. Comparison before and after the CMCLDN-RS optimization. https://doi.org/10.1371/journal.pone.0242555.t002 Table 2 indicates that the central transportation cost, which is $143 in the first service period and $102 in the second, should be considered after CMCLDN-RS optimization. The delivery costs in the first and second service periods are $2610 and $1350 before CMCLDN-RS optimization and $1830 and $840 after, respectively. The total number of vehicles used for serving customers is 18 before CMCLDN-RS optimization and 11 after. The total service waiting time changes from 21 mins to 0, which is a reduction of 21 mins. The results show an obvious reduction in the total cost (from $4380 to $2915) and the number of vehicles (from 18 to 11) in the collaborative logistics network. That is, utilizing resource sharing can reduce the operational costs of the entire delivery network. Model formulation Two resource sharing schemes are considered in the optimization problem of CMCLDN-RS efficiently utilizing logistics resources. Trucks are shared between DCs, and shared vehicles are utilized to serve customers. To make CMCLDN-RS more realistic, several assumptions are illustrated as follows. Assumption 1: The demands of each customer are known and stable within each service period. Assumption 2: In the original logistics network, each DC operates independently. Assumption 3: Each DC pursues maximum profits. To formulate the CMCLDN-RS optimization problem into a mathematical model, the definitions used in the model are provided in Table 3. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 3. Symbols and description. https://doi.org/10.1371/journal.pone.0242555.t003 The CMCLDN-RS optimization model aims to minimize the total operational cost and number of vehicles of a collaborative multicenter delivery network, as shown in Eqs (1) and (2). (1)(2) TC1 is the cost for goods transportation. cπidkxπidk is the transportation cost among DCs, is the truck maintenance cost, Gdπydπ refers to the government subsidies when DC d joins an alliance, and and are the penalty costs for trucks. (3) TC2 is the cost for goods delivery within each DC. cπdcvxπdcv is the delivery cost for visiting customers served via closed delivery routes only by one DC, and are the penalty costs for vehicles in closed delivery routes, and is the vehicle maintenance cost. (4)) TC3 is the cost for goods delivery among DCs. cπdsvxπdsv is the delivery cost for visiting customers served via open delivery routes among DCs, and are the penalty costs for vehicles in open delivery, and is the vehicle maintenance cost. (5) Subject to: (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) (18) (19) (20) (21) (22) (23) (24) (25) (26) Constraints (6) and (7) ensure that each customer is served by only one DC. Constraints (8) and (9) guarantee that the delivery loads do not exceed the vehicle capacity. Constraint (10) ensures the conservation of goods flow for visiting customers served via internal vehicle sharing within each DC. Constraints (11) and (12) aim to eliminate the subtour in the delivery process. Constraint (13) guarantees that total customer demands do not exceed the DC capacity. Constraints (14) and (15) stipulate the delivery quantity from DC i to d, which is equivalent to the total change of customer quantities from DC i to d. Constraints (16) and (17) limit the arrival time of each vehicle for visiting customers served by internal vehicle sharing within each DC. Constraints (18) and (19) limit the arrival time of each vehicle for visiting customers served by vehicle sharing among DCs. Constraints (20) and (21) guarantee that each customer is served in their expected time windows. Constraints (22)–(26) are binary decision variables. Research methodologies Related definitions and solution procedure Our proposed CMCLDN-RS problem not only can improve the operational efficiency of a multicenter distribution network but can also reduce the network operation costs. Fig 2 shows the AGPSO process for solving the CMCLDN-RS problem. To clarify the relevant optimization process, several required parameters are defined as follows. nPOP: Population size nREP: Repository size gnmax: Maximum number of iterations Rnmax: Maximum number of optimization runs W: Coefficient of inertia R1: Personal learning coefficient R2: Global learning coefficient nGrid: Number of grids per dimension α: Inflation rate β: Leader selection pressure γ: Deletion selection pressure Mut: Mutation rate Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 2. AGPSO flowchart. https://doi.org/10.1371/journal.pone.0242555.g002 Adaptive grid particle swarm optimization Due to the complexity of CMCLDN-RS when considering a large number of customers, it is inefficient to solve the heuristic algorithm directly. Therefore, the combination of a clustering algorithm and AGPSO is used to solve the CMCLDN-RS optimization problem. AGPSO aims to make the obtained optimal Pareto solution as close as possible to the true Pareto optimal frontier. The Pareto solutions are calculated based on the nondominated sorting and crowding distance for each generation, and then the optimal Pareto is filtered out of all the Pareto solutions [55, 56]. First, the nondominated solutions are sorted in accordance with the value of the bi-objective function, and the nondominated solutions in the Pareto frontier with peer rank has the same degree of optimization. Second, the crowding distance of each particle is calculated as the sum of the distance values that correspond to each objective for every particle. Third, the Pareto frontier of different ranks are obtained. Finally, the optimal non-dominated solutions can be considered and selected as the solution with peer rank based on the focus of the bi-objective. The most important components of AGPSO are determining how to choose the personal best position pbest and global best position gbest and how to maintain the external repository. For AGPSO, the method to select the best position of an individual is to compare the current particle position with the best historical position of the individual. If the new solution dominates the current pbest, then the new solution acts as the new pbest. gbest is not unique in multi-objective optimization, presenting multiple global optimal solutions that are not dominated by one another. These solutions are stored in the external repository. The external repository not only stores the nondominated vectors obtained along the search process but also plays a role in guiding the population to the latest Pareto frontier. In addition, the Pareto frontier can be extended to the Pareto front surface to select the optimal solution for solving problems involving more than two objective functions [57]. The specific process of AGPSO is explained as follows, and the pseudo-code procedure is shown in Table 4. Customer clustering: The imported customer data are clustered based on the attributes of customers. Manhattan distance is utilized to calculate the distance between customers. Population initialization: Population POP and the velocity of each particle are initialized, and the initial vehicle routes are generated according to the capacity constraints (8)-(9), subtour constraints (11)-(12), and time window constraints (16)-(21), and then the objective function values corresponding to each particle are found. The locations that replace the nondominated vectors are stored in the repository REP. Fitness function value calculation: The fitness function values include the total operational cost in Eq (1) and number of vehicles in Eq (2), and the two objectives constitute a two-dimensional coordinate, which is used to obtain the Pareto frontier of different ranks based on the nondominated sorting and crowding distance. The fitness function values of each particle are calculated based on the crowding distance of each particle and the nondominated sorting process. The initial personal best position pbest and global best position gbest of the particle are determined on the basis of the population initialization scheme. Velocity and position update and pbest adjustment: W is the inertia weight that controls the convergence of the algorithm, and R1 and R2 are uniform random numbers in interval [0,1]. If pbest is dominated by the new particle position, then pbest will be replaced by the new position. If any one is not dominated by others, then one with a probability is randomly selected. External repository maintenance: The objective function values of each particle in the newly generated population Pt+1 is calculated, when the accumulated demands exceed the capacity of the vehicle according to the capacity constraints (8), (9) and (13), in addition, it will return to the departure DC for the internal vehicle sharing routes, for vehicle sharing between DCs, it will return to an adjacent DC for the vehicle sharing routes among DCs. The positions that replace the nondominated vectors are stored in repository REP. The external repository is maintained and updated, and REPt+1 is generated, and then gbest of each particle is chosen. Algorithm termination conditions: If the algorithm reaches the termination condition then the iteration is stopped; otherwise, t = t + 1, and step (3) is repeated. When the algorithm terminates, the current external repository At is the Pareto solution set. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 4. AGPSO algorithm procedure. https://doi.org/10.1371/journal.pone.0242555.t004 Adaptive grid density estimation algorithm. An adaptive grid density estimation algorithm is utilized to update the external repository. The updates of the external repository must meet either of the following two conditions: (1) the newly-generated particles dominate one or more particles in the external repository; (2) the number of particles in the external repository has reached the allowed capacity. The adaptive grid algorithm first appeared in the Pareto archived evolution strategy [56, 58]. The adaptive grid density estimation algorithm needs to compute the density information of particles in Archive. The target space is divided into small cells with a grid and the number of particles contained in each area is used as the density information of the particles. The main procedure is as follows. Step 1: The boundary of the target space during t-generation evolution and is calculated. Step 2: The Modulus of the grid is calculated as follows: . Step 3: The indices of the grids in which particles are calculated. For particle i, the grid index consists of two parts: . Step 4: Grid information is calculated and the number of particles in the grid is saved to array Grid []. Step 5: Particle density estimates are calculated and the results are stored to array Archive_Obj[]. Archive truncation operation. When the number of particles in the archive exceeds the allowed capacity, excess individuals need to be discarded to maintain the stability of the archive. For grid g with more than one particle, the number of particles PN to be deleted in the grid g is calculated using Eq (27), then PN particles are randomly discarded in it. (27) Grid [g] represents the number of contained particles in grid g. The schematic of the archive truncation operation is shown in Fig 3. The black circles in Fig 3B are the deleted particles. Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 3. Illustration of the archive truncation operation. https://doi.org/10.1371/journal.pone.0242555.g003 Mutation operator. To avoid the PSO-based algorithm to converge to a false Pareto front, Coello et al. [59] proposed a new mutation operator in MOPSO, which considers the effect of the mutation operator on the number of iterations and particle swarms. The mutation operator is used in this paper. Its pseudocode is illustrated in Table 5. pm is the particle to be mutated, dims is the number of dimensions, currentgen is the current iteration, totgen is the total number of iterations, and mr is the mutation rate. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 5. Procedure of the mutation operator. https://doi.org/10.1371/journal.pone.0242555.t005 Profit allocation method For the CMCLDN-RS optimization problem, collaborative alliances can achieve resource sharing among multiple centers and reduce the total operational cost of collaborative alliances. The cost saving generated by collaboration should be fairly allocated to each participant. MCRS is a game theory method for solving the problem of cost or benefit allocation [4, 60]. We suppose that N = {1,2,3,…,i} can be the set of all participants and A be a subset of N. V(N) is the total profits of the alliance with all participants in N and V(A) is the profit of A and can be calculated by Eq (28). (28) In Eq (28), C0(i) is the initial cost of participant i. C(A) is the optimized cost of alliance A. σ is the synergy coefficient of the logistics provider that facilitates the collaboration among DCs. The upper and lower bounds of the profit allocation method are Xmin = {X1min,⋯,Xjmin,⋯,Xnmin} and Xmax = {X1max,⋯,Xjmax,⋯,Xnmax}, respectively. Xjmax expresses the maximum profits of DC j, and Xjmin expresses the minimum profit of DC j. The actual profit of DC j can be calculated using Eq (29). (29) In Eq (29), Xjmax and Xjmin can be calculated using Eqs (29) and (30) as follows, where V(A−{j}) is the residual profit of alliance A except participant j and V(j) is the profit of participant j. (30)(31) Subject to (32) (33) (34) (35) Eqs (32) and (34) ensure the collective profit of each alliance and participant. Eq (35) guarantees that the value of Xj(A,V) is between Xjmin and Xjmax. The Cost reduction percentage η(i,ϕ,u) of participant i in sequence ϕ when the uth participant joins the alliance is calculated using Eq (36). (36) Related definitions and solution procedure Our proposed CMCLDN-RS problem not only can improve the operational efficiency of a multicenter distribution network but can also reduce the network operation costs. Fig 2 shows the AGPSO process for solving the CMCLDN-RS problem. To clarify the relevant optimization process, several required parameters are defined as follows. nPOP: Population size nREP: Repository size gnmax: Maximum number of iterations Rnmax: Maximum number of optimization runs W: Coefficient of inertia R1: Personal learning coefficient R2: Global learning coefficient nGrid: Number of grids per dimension α: Inflation rate β: Leader selection pressure γ: Deletion selection pressure Mut: Mutation rate Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 2. AGPSO flowchart. https://doi.org/10.1371/journal.pone.0242555.g002 Adaptive grid particle swarm optimization Due to the complexity of CMCLDN-RS when considering a large number of customers, it is inefficient to solve the heuristic algorithm directly. Therefore, the combination of a clustering algorithm and AGPSO is used to solve the CMCLDN-RS optimization problem. AGPSO aims to make the obtained optimal Pareto solution as close as possible to the true Pareto optimal frontier. The Pareto solutions are calculated based on the nondominated sorting and crowding distance for each generation, and then the optimal Pareto is filtered out of all the Pareto solutions [55, 56]. First, the nondominated solutions are sorted in accordance with the value of the bi-objective function, and the nondominated solutions in the Pareto frontier with peer rank has the same degree of optimization. Second, the crowding distance of each particle is calculated as the sum of the distance values that correspond to each objective for every particle. Third, the Pareto frontier of different ranks are obtained. Finally, the optimal non-dominated solutions can be considered and selected as the solution with peer rank based on the focus of the bi-objective. The most important components of AGPSO are determining how to choose the personal best position pbest and global best position gbest and how to maintain the external repository. For AGPSO, the method to select the best position of an individual is to compare the current particle position with the best historical position of the individual. If the new solution dominates the current pbest, then the new solution acts as the new pbest. gbest is not unique in multi-objective optimization, presenting multiple global optimal solutions that are not dominated by one another. These solutions are stored in the external repository. The external repository not only stores the nondominated vectors obtained along the search process but also plays a role in guiding the population to the latest Pareto frontier. In addition, the Pareto frontier can be extended to the Pareto front surface to select the optimal solution for solving problems involving more than two objective functions [57]. The specific process of AGPSO is explained as follows, and the pseudo-code procedure is shown in Table 4. Customer clustering: The imported customer data are clustered based on the attributes of customers. Manhattan distance is utilized to calculate the distance between customers. Population initialization: Population POP and the velocity of each particle are initialized, and the initial vehicle routes are generated according to the capacity constraints (8)-(9), subtour constraints (11)-(12), and time window constraints (16)-(21), and then the objective function values corresponding to each particle are found. The locations that replace the nondominated vectors are stored in the repository REP. Fitness function value calculation: The fitness function values include the total operational cost in Eq (1) and number of vehicles in Eq (2), and the two objectives constitute a two-dimensional coordinate, which is used to obtain the Pareto frontier of different ranks based on the nondominated sorting and crowding distance. The fitness function values of each particle are calculated based on the crowding distance of each particle and the nondominated sorting process. The initial personal best position pbest and global best position gbest of the particle are determined on the basis of the population initialization scheme. Velocity and position update and pbest adjustment: W is the inertia weight that controls the convergence of the algorithm, and R1 and R2 are uniform random numbers in interval [0,1]. If pbest is dominated by the new particle position, then pbest will be replaced by the new position. If any one is not dominated by others, then one with a probability is randomly selected. External repository maintenance: The objective function values of each particle in the newly generated population Pt+1 is calculated, when the accumulated demands exceed the capacity of the vehicle according to the capacity constraints (8), (9) and (13), in addition, it will return to the departure DC for the internal vehicle sharing routes, for vehicle sharing between DCs, it will return to an adjacent DC for the vehicle sharing routes among DCs. The positions that replace the nondominated vectors are stored in repository REP. The external repository is maintained and updated, and REPt+1 is generated, and then gbest of each particle is chosen. Algorithm termination conditions: If the algorithm reaches the termination condition then the iteration is stopped; otherwise, t = t + 1, and step (3) is repeated. When the algorithm terminates, the current external repository At is the Pareto solution set. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 4. AGPSO algorithm procedure. https://doi.org/10.1371/journal.pone.0242555.t004 Adaptive grid density estimation algorithm. An adaptive grid density estimation algorithm is utilized to update the external repository. The updates of the external repository must meet either of the following two conditions: (1) the newly-generated particles dominate one or more particles in the external repository; (2) the number of particles in the external repository has reached the allowed capacity. The adaptive grid algorithm first appeared in the Pareto archived evolution strategy [56, 58]. The adaptive grid density estimation algorithm needs to compute the density information of particles in Archive. The target space is divided into small cells with a grid and the number of particles contained in each area is used as the density information of the particles. The main procedure is as follows. Step 1: The boundary of the target space during t-generation evolution and is calculated. Step 2: The Modulus of the grid is calculated as follows: . Step 3: The indices of the grids in which particles are calculated. For particle i, the grid index consists of two parts: . Step 4: Grid information is calculated and the number of particles in the grid is saved to array Grid []. Step 5: Particle density estimates are calculated and the results are stored to array Archive_Obj[]. Archive truncation operation. When the number of particles in the archive exceeds the allowed capacity, excess individuals need to be discarded to maintain the stability of the archive. For grid g with more than one particle, the number of particles PN to be deleted in the grid g is calculated using Eq (27), then PN particles are randomly discarded in it. (27) Grid [g] represents the number of contained particles in grid g. The schematic of the archive truncation operation is shown in Fig 3. The black circles in Fig 3B are the deleted particles. Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 3. Illustration of the archive truncation operation. https://doi.org/10.1371/journal.pone.0242555.g003 Mutation operator. To avoid the PSO-based algorithm to converge to a false Pareto front, Coello et al. [59] proposed a new mutation operator in MOPSO, which considers the effect of the mutation operator on the number of iterations and particle swarms. The mutation operator is used in this paper. Its pseudocode is illustrated in Table 5. pm is the particle to be mutated, dims is the number of dimensions, currentgen is the current iteration, totgen is the total number of iterations, and mr is the mutation rate. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 5. Procedure of the mutation operator. https://doi.org/10.1371/journal.pone.0242555.t005 Adaptive grid density estimation algorithm. An adaptive grid density estimation algorithm is utilized to update the external repository. The updates of the external repository must meet either of the following two conditions: (1) the newly-generated particles dominate one or more particles in the external repository; (2) the number of particles in the external repository has reached the allowed capacity. The adaptive grid algorithm first appeared in the Pareto archived evolution strategy [56, 58]. The adaptive grid density estimation algorithm needs to compute the density information of particles in Archive. The target space is divided into small cells with a grid and the number of particles contained in each area is used as the density information of the particles. The main procedure is as follows. Step 1: The boundary of the target space during t-generation evolution and is calculated. Step 2: The Modulus of the grid is calculated as follows: . Step 3: The indices of the grids in which particles are calculated. For particle i, the grid index consists of two parts: . Step 4: Grid information is calculated and the number of particles in the grid is saved to array Grid []. Step 5: Particle density estimates are calculated and the results are stored to array Archive_Obj[]. Archive truncation operation. When the number of particles in the archive exceeds the allowed capacity, excess individuals need to be discarded to maintain the stability of the archive. For grid g with more than one particle, the number of particles PN to be deleted in the grid g is calculated using Eq (27), then PN particles are randomly discarded in it. (27) Grid [g] represents the number of contained particles in grid g. The schematic of the archive truncation operation is shown in Fig 3. The black circles in Fig 3B are the deleted particles. Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 3. Illustration of the archive truncation operation. https://doi.org/10.1371/journal.pone.0242555.g003 Mutation operator. To avoid the PSO-based algorithm to converge to a false Pareto front, Coello et al. [59] proposed a new mutation operator in MOPSO, which considers the effect of the mutation operator on the number of iterations and particle swarms. The mutation operator is used in this paper. Its pseudocode is illustrated in Table 5. pm is the particle to be mutated, dims is the number of dimensions, currentgen is the current iteration, totgen is the total number of iterations, and mr is the mutation rate. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 5. Procedure of the mutation operator. https://doi.org/10.1371/journal.pone.0242555.t005 Profit allocation method For the CMCLDN-RS optimization problem, collaborative alliances can achieve resource sharing among multiple centers and reduce the total operational cost of collaborative alliances. The cost saving generated by collaboration should be fairly allocated to each participant. MCRS is a game theory method for solving the problem of cost or benefit allocation [4, 60]. We suppose that N = {1,2,3,…,i} can be the set of all participants and A be a subset of N. V(N) is the total profits of the alliance with all participants in N and V(A) is the profit of A and can be calculated by Eq (28). (28) In Eq (28), C0(i) is the initial cost of participant i. C(A) is the optimized cost of alliance A. σ is the synergy coefficient of the logistics provider that facilitates the collaboration among DCs. The upper and lower bounds of the profit allocation method are Xmin = {X1min,⋯,Xjmin,⋯,Xnmin} and Xmax = {X1max,⋯,Xjmax,⋯,Xnmax}, respectively. Xjmax expresses the maximum profits of DC j, and Xjmin expresses the minimum profit of DC j. The actual profit of DC j can be calculated using Eq (29). (29) In Eq (29), Xjmax and Xjmin can be calculated using Eqs (29) and (30) as follows, where V(A−{j}) is the residual profit of alliance A except participant j and V(j) is the profit of participant j. (30)(31) Subject to (32) (33) (34) (35) Eqs (32) and (34) ensure the collective profit of each alliance and participant. Eq (35) guarantees that the value of Xj(A,V) is between Xjmin and Xjmax. The Cost reduction percentage η(i,ϕ,u) of participant i in sequence ϕ when the uth participant joins the alliance is calculated using Eq (36). (36) Case study Algorithm comparison The proposed AGPSO algorithm, nondominated sorting genetic algorithm-II (NSGA-II) [61], and multi-objective evolutionary algorithm (MOEA) [62] are tested using 36 different datasets to evaluate the applicability of the proposed algorithm to CMCLDN-RS optimization. Table 6 shows the data from each of the 36 groups. The total operational cost, the number of vehicles used for delivery, and the computation time are compared to assess the effectiveness of AGPSO. The selection process of related parameters is important and necessary, and there are several methods to select related parameters, including comparative experiment and selection [4, 39, 40, 63, 64], orthogonal experimental design [65], etc. A parameter sensitivity analysis is performed to determine the parameter sensitivity and select parameter values. Through a large number of computational experiments and comparisons, we find that the coefficient of inertia, Inflation rate, and mutation rate are relatively sensitive, and when the coefficient of inertia is set as the medium value, and the inflation rate and the mutation rate are set as small values, the optimal costs and number of vehicles are more likely to be obtained in a short time. The related parameters of AGPSO are illustrated as follows: nPOP = 50, nREP = 15, W = 0.5, R1 = 1, R2 = 2, nGrid = 7, α = 0.1, β = 2, λ = 2, mut = 0.1. In addition, TS = 40 represents the travel speed, Lk = 1500, Lv = 200, Mk = 1500, Mv = 500, θ1 = 0.05, θ2 = 0.1. The optimal total cost of logistics operation, number of vehicles and computation time are calculated and compared among the three algorithms with 20 randomly generated datasets are shown in Table 7. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 6. Description of instances. https://doi.org/10.1371/journal.pone.0242555.t006 Download: PPT PowerPoint slide PNG larger image TIFF original image Table 7. Comparison of the results of algorithm optimization. https://doi.org/10.1371/journal.pone.0242555.t007 The best solution and computation time returned by each algorithm for each data instance is listed in Table 7. t-test and p-value results for optimal logistics operational costs are shown at the bottom of Table 7, which indicates that NSGAII and MOEA are significantly different from AGPSO. Regarding cost optimization, AGPSO performs better than NSGAII and GA-TS in most cases. For example, the average cost of the 36 instances of AGPSO is $22055, whereas NSGAII and GA-TS are $23178 and $23828, respectively. The optimization effectiveness for the number of vehicles is the same amongst all three algorithms. They all have an average number of 14 vehicles. For computation time, the proposed AGPSO tends to take the most time to converge among the three algorithms. MOEA performs well in computation time but is inferior in the cost optimization effectiveness. Data description A practical case of CMCLDN-RS optimization, conducted in Chengdu, China, is studied to test the applicability of the proposed logistics network optimization mechanism. Four DCs (DC1, DC2, DC3, and DC4) and 180 customers (C1, C2, …, C180) are selected from the complex network to demonstrate the effectiveness of CMCLDN-RS optimization. The coordinate location information of four DCs and 180 customers is shown in S1 Dataset. Table 8 shows the characteristics of all DCs and their allocated number of customers. Table 9 shows the initial assignment of customers served by each DC in the initial non-collaborative logistics network. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 8. Characteristics of logistics facilities. https://doi.org/10.1371/journal.pone.0242555.t008 Download: PPT PowerPoint slide PNG larger image TIFF original image Table 9. Initial assignment of customers served by each DC. https://doi.org/10.1371/journal.pone.0242555.t009 In Table 9, customers with asterisks are potentially shared among DCs. In addition, Table 9 indicates that the existence of unreasonable customer services such as cross- and long-distance transportations increase the complexity of the logistics network; thus, it’s essential to study the collaboration mechanism and resource sharing schemes for CMCLDN-RS among multiple DCs across several periods. Optimization results As mentioned in the above model formulation, the global sharing for the collaborative logistics network consists of two collaborative modes. One mode consists of internal vehicle sharing within each DC in different service periods. Some products in different DCs have similar but unique attributes and are unsuitable for delivering with others; thus, collaboration among DCs is considered so that vehicle sharing can deliver such category of products. In this study, such a situation exists between DC1 and DC2 and between DC3 and DC4 in the initial multi-center logistics network. Therefore, vehicle sharing between DC1 and DC2 and between DC3 and DC4 should be considered. The other collaborative mode is vehicle sharing among DCs in different service periods (i.e., considering products of DCs with similar attributes but which cannot be delivered with general products). The parameter sensitivity analysis process is performed to select parameter values in the optimization model as follows. The fixed cost of each DC is: F1 = 1200, F2 = 1000, F3 = 900, F4 = 1100. Incentives offered to each participant are: G1 = 298, G2 = 341, G3 = 268, G4 = 314. The parameters used for AGPSO are as follows [39, 40, 63, 64]: nPOP = 150, nREP = 20, W = 0.5, R1 = 1, R2 = 2, nGrid = 9, α = 0.1, β = 2, λ = 2, mut = 0.1, TS = 40, Lk = 1500, Lv = 200, Mk = 1500, Mv = 500, θ1 = 0.05, θ2 = 0.1. We consider two collaborative forms in this study, and 52 working periods are included in a year. The AGPSO algorithm is used to reassign customers and calculate total cost in a working period. Cost savings generated by optimizing the initial network are allocated via MCRS. Details are discussed below. Table 10 indicates the assignment of customers served via internal vehicle sharing within each service period in the grand alliance. Table 11 shows the assignment of customers served among DCs within each service period. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 10. Assignment of customers served via internal vehicle sharing within each DC in the grand alliance. https://doi.org/10.1371/journal.pone.0242555.t010 Download: PPT PowerPoint slide PNG larger image TIFF original image Table 11. Routes of customers served among DCs. https://doi.org/10.1371/journal.pone.0242555.t011 Table 11 shows the open delivery routes (i.e. sharing among DCs) after CMCLDN-RS optimization. In this sharing mode, the DC1-DC2 pair and DC3-DC4 pair collaborate to achieve vehicle sharing among the three service periods. For example, in period 1 of alliance {DC1, DC2}, the vehicle departs from DC1 and arrives at DC2 after serving D24, D42, D19, D35, D89, and D10, and then departs from DC2 to serve D49, D44, and D47 and finally returns to DC2. The same vehicle departs from DC2 to serve related customers in period 2, which is also shared in period 3. For global sharing, the result comparison before and after CMCLDN-RS optimization in three periods is shown in Table 12 and Fig 4. The number of customers to be served and the customer needs in each service period are different; thus, the logistics operational cost, service waiting time, and number of vehicles used in different periods also differ. However, the three components are all reduced after CMCLDN-RS optimization in the same service period. For example, the logistics operational cost decreases from $7939 to $4649, the service waiting time changes from 18.21 min to 16.42 min, and the number of vehicles decreases from 8 to 5 after collaboration in the first service period. From a holistic perspective, the total logistics operational cost, service waiting time, and number of vehicles used for three service periods are all reduced, which indicates that the CMCLDN-RS optimization is effective in coordinating logistics resources. Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 4. Result comparison before and after CMCLDN-RS optimization in three periods. https://doi.org/10.1371/journal.pone.0242555.g004 Download: PPT PowerPoint slide PNG larger image TIFF original image Table 12. Result comparison before and after CMCLDN-RS optimization in three periods. https://doi.org/10.1371/journal.pone.0242555.t012 The optimization results, including cost savings and the changes in initial and optimized costs and number of vehicles, are summarized in Table 13 and illustrated in Fig 5. Table 12 displays that the total costs will be decreased when the participant agrees to join an alliance. For example, the initial costs of alliance {DC1, DC2} is $16551, whereas the optimized cost is $11344, thereby generating a cost savings of $4382. The total cost savings are also affected by the number of alliance members. The cost savings of alliance {DC1, DC2} is $5207, whereas the cost savings of {DC1, DC2, DC3} are $6888. The addition of DC3 saves considerable costs. The number of vehicles is shown in Fig 5, which indicates that the number of vehicles used in the initial alliance are more than the number in the optimized alliance. Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 5. Comparison of initial and optimized costs and number of vehicles. https://doi.org/10.1371/journal.pone.0242555.g005 Download: PPT PowerPoint slide PNG larger image TIFF original image Table 13. Comparison between initial and optimized networks within one working period. https://doi.org/10.1371/journal.pone.0242555.t013 In all circumstances, we observe effective cost reduction in Table 13 and Fig 5. Therefore, DCs should cooperate and share their resources to minimize expenses. Fig 5 indicates that the largest cost and vehicle gaps are generated when forming the grand alliance. Although the collaboration with any other DC is cost effective, the participants intend to increase their profit by considering global sharing and forming a grand alliance. In addition, the logistics provider as the coordinator would not be allocated any profits, and so the synergy requirement parameter σ = 0. The cost savings are equally allocated among DC1, DC2, DC3, and DC4 using MCRS. Table 14 shows the allocation results. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 14. Profit distribution of DCs for global sharing. https://doi.org/10.1371/journal.pone.0242555.t014 Table 14 shows that different DCs gain different profits in different alliance scenarios. For example, the profit of DC1 for cooperating with DC2 is $2170, whereas its profit for cooperating with DC3 is $1661. In practice, the DC attached to any alliance is subjected to profit gaining from the entire network. Most economically driven companies participate in the alliance to maximize profit. The order in which participants join the alliance will affect the results of the profit allocation [66]. SMP is a method to find the proper alliance sequence for maximizing benefits [48]. In accordance with SMP [24], the feasible alliance sequences are shown in Table 15. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 15. Feasible alliance based on global sharing in CMCLDN-RS. https://doi.org/10.1371/journal.pone.0242555.t015 Comparisons of all the feasible collaboration sequences in Table 15 indicate that the optimal alliance of the collaborative network is ϕ1 = {DC1,DC2,DC3,DC4}, as shown in Table 16. In greater detail, the optimal collaboration strategy can be described as follows: DC1 joins the alliance first and achieves 5% cost reduction; DC2 follows and yields 29.6% reduction, and DC1 has 33.6% reduction; when DC3 joins, the reduction becomes 34.6%, 29.8%, and 22.8% for DC1, DC2, and DC3, respectively; and as DC4 enters, DC1, DC2, DC3, and DC4 can reduce their costs by 39.0%, 36.0%, 51.3%, and 41.0%, respectively. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 16. Optimal collaboration sequences based on the SMP principle. https://doi.org/10.1371/journal.pone.0242555.t016 To verify the accuracy of our profit distribution, the Shapley value model, nucleolus, and cost gap allocation (CGA) are applied to find distribution schemes corresponding to the grand alliance and are then compared with MCRS. Considering previous research [67], the core center shown in Fig 6 is also obtained by compressing the polyhedron and narrowing the core into a single point. Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 6. Profit allocation by using MCRS, Shapley, nucleolus, and CGA. https://doi.org/10.1371/journal.pone.0242555.g006 Comparisons of the distance between each profit allocation method and the core center prove that CGA is the farthest from the core center and MCRS is the closest. Therefore, the best profit allocation scheme among DCs is $2584, $2777, $2565, and $2448, and MCRS is selected to be the most appropriate allocation strategy in this case study. Algorithm comparison The proposed AGPSO algorithm, nondominated sorting genetic algorithm-II (NSGA-II) [61], and multi-objective evolutionary algorithm (MOEA) [62] are tested using 36 different datasets to evaluate the applicability of the proposed algorithm to CMCLDN-RS optimization. Table 6 shows the data from each of the 36 groups. The total operational cost, the number of vehicles used for delivery, and the computation time are compared to assess the effectiveness of AGPSO. The selection process of related parameters is important and necessary, and there are several methods to select related parameters, including comparative experiment and selection [4, 39, 40, 63, 64], orthogonal experimental design [65], etc. A parameter sensitivity analysis is performed to determine the parameter sensitivity and select parameter values. Through a large number of computational experiments and comparisons, we find that the coefficient of inertia, Inflation rate, and mutation rate are relatively sensitive, and when the coefficient of inertia is set as the medium value, and the inflation rate and the mutation rate are set as small values, the optimal costs and number of vehicles are more likely to be obtained in a short time. The related parameters of AGPSO are illustrated as follows: nPOP = 50, nREP = 15, W = 0.5, R1 = 1, R2 = 2, nGrid = 7, α = 0.1, β = 2, λ = 2, mut = 0.1. In addition, TS = 40 represents the travel speed, Lk = 1500, Lv = 200, Mk = 1500, Mv = 500, θ1 = 0.05, θ2 = 0.1. The optimal total cost of logistics operation, number of vehicles and computation time are calculated and compared among the three algorithms with 20 randomly generated datasets are shown in Table 7. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 6. Description of instances. https://doi.org/10.1371/journal.pone.0242555.t006 Download: PPT PowerPoint slide PNG larger image TIFF original image Table 7. Comparison of the results of algorithm optimization. https://doi.org/10.1371/journal.pone.0242555.t007 The best solution and computation time returned by each algorithm for each data instance is listed in Table 7. t-test and p-value results for optimal logistics operational costs are shown at the bottom of Table 7, which indicates that NSGAII and MOEA are significantly different from AGPSO. Regarding cost optimization, AGPSO performs better than NSGAII and GA-TS in most cases. For example, the average cost of the 36 instances of AGPSO is $22055, whereas NSGAII and GA-TS are $23178 and $23828, respectively. The optimization effectiveness for the number of vehicles is the same amongst all three algorithms. They all have an average number of 14 vehicles. For computation time, the proposed AGPSO tends to take the most time to converge among the three algorithms. MOEA performs well in computation time but is inferior in the cost optimization effectiveness. Data description A practical case of CMCLDN-RS optimization, conducted in Chengdu, China, is studied to test the applicability of the proposed logistics network optimization mechanism. Four DCs (DC1, DC2, DC3, and DC4) and 180 customers (C1, C2, …, C180) are selected from the complex network to demonstrate the effectiveness of CMCLDN-RS optimization. The coordinate location information of four DCs and 180 customers is shown in S1 Dataset. Table 8 shows the characteristics of all DCs and their allocated number of customers. Table 9 shows the initial assignment of customers served by each DC in the initial non-collaborative logistics network. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 8. Characteristics of logistics facilities. https://doi.org/10.1371/journal.pone.0242555.t008 Download: PPT PowerPoint slide PNG larger image TIFF original image Table 9. Initial assignment of customers served by each DC. https://doi.org/10.1371/journal.pone.0242555.t009 In Table 9, customers with asterisks are potentially shared among DCs. In addition, Table 9 indicates that the existence of unreasonable customer services such as cross- and long-distance transportations increase the complexity of the logistics network; thus, it’s essential to study the collaboration mechanism and resource sharing schemes for CMCLDN-RS among multiple DCs across several periods. Optimization results As mentioned in the above model formulation, the global sharing for the collaborative logistics network consists of two collaborative modes. One mode consists of internal vehicle sharing within each DC in different service periods. Some products in different DCs have similar but unique attributes and are unsuitable for delivering with others; thus, collaboration among DCs is considered so that vehicle sharing can deliver such category of products. In this study, such a situation exists between DC1 and DC2 and between DC3 and DC4 in the initial multi-center logistics network. Therefore, vehicle sharing between DC1 and DC2 and between DC3 and DC4 should be considered. The other collaborative mode is vehicle sharing among DCs in different service periods (i.e., considering products of DCs with similar attributes but which cannot be delivered with general products). The parameter sensitivity analysis process is performed to select parameter values in the optimization model as follows. The fixed cost of each DC is: F1 = 1200, F2 = 1000, F3 = 900, F4 = 1100. Incentives offered to each participant are: G1 = 298, G2 = 341, G3 = 268, G4 = 314. The parameters used for AGPSO are as follows [39, 40, 63, 64]: nPOP = 150, nREP = 20, W = 0.5, R1 = 1, R2 = 2, nGrid = 9, α = 0.1, β = 2, λ = 2, mut = 0.1, TS = 40, Lk = 1500, Lv = 200, Mk = 1500, Mv = 500, θ1 = 0.05, θ2 = 0.1. We consider two collaborative forms in this study, and 52 working periods are included in a year. The AGPSO algorithm is used to reassign customers and calculate total cost in a working period. Cost savings generated by optimizing the initial network are allocated via MCRS. Details are discussed below. Table 10 indicates the assignment of customers served via internal vehicle sharing within each service period in the grand alliance. Table 11 shows the assignment of customers served among DCs within each service period. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 10. Assignment of customers served via internal vehicle sharing within each DC in the grand alliance. https://doi.org/10.1371/journal.pone.0242555.t010 Download: PPT PowerPoint slide PNG larger image TIFF original image Table 11. Routes of customers served among DCs. https://doi.org/10.1371/journal.pone.0242555.t011 Table 11 shows the open delivery routes (i.e. sharing among DCs) after CMCLDN-RS optimization. In this sharing mode, the DC1-DC2 pair and DC3-DC4 pair collaborate to achieve vehicle sharing among the three service periods. For example, in period 1 of alliance {DC1, DC2}, the vehicle departs from DC1 and arrives at DC2 after serving D24, D42, D19, D35, D89, and D10, and then departs from DC2 to serve D49, D44, and D47 and finally returns to DC2. The same vehicle departs from DC2 to serve related customers in period 2, which is also shared in period 3. For global sharing, the result comparison before and after CMCLDN-RS optimization in three periods is shown in Table 12 and Fig 4. The number of customers to be served and the customer needs in each service period are different; thus, the logistics operational cost, service waiting time, and number of vehicles used in different periods also differ. However, the three components are all reduced after CMCLDN-RS optimization in the same service period. For example, the logistics operational cost decreases from $7939 to $4649, the service waiting time changes from 18.21 min to 16.42 min, and the number of vehicles decreases from 8 to 5 after collaboration in the first service period. From a holistic perspective, the total logistics operational cost, service waiting time, and number of vehicles used for three service periods are all reduced, which indicates that the CMCLDN-RS optimization is effective in coordinating logistics resources. Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 4. Result comparison before and after CMCLDN-RS optimization in three periods. https://doi.org/10.1371/journal.pone.0242555.g004 Download: PPT PowerPoint slide PNG larger image TIFF original image Table 12. Result comparison before and after CMCLDN-RS optimization in three periods. https://doi.org/10.1371/journal.pone.0242555.t012 The optimization results, including cost savings and the changes in initial and optimized costs and number of vehicles, are summarized in Table 13 and illustrated in Fig 5. Table 12 displays that the total costs will be decreased when the participant agrees to join an alliance. For example, the initial costs of alliance {DC1, DC2} is $16551, whereas the optimized cost is $11344, thereby generating a cost savings of $4382. The total cost savings are also affected by the number of alliance members. The cost savings of alliance {DC1, DC2} is $5207, whereas the cost savings of {DC1, DC2, DC3} are $6888. The addition of DC3 saves considerable costs. The number of vehicles is shown in Fig 5, which indicates that the number of vehicles used in the initial alliance are more than the number in the optimized alliance. Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 5. Comparison of initial and optimized costs and number of vehicles. https://doi.org/10.1371/journal.pone.0242555.g005 Download: PPT PowerPoint slide PNG larger image TIFF original image Table 13. Comparison between initial and optimized networks within one working period. https://doi.org/10.1371/journal.pone.0242555.t013 In all circumstances, we observe effective cost reduction in Table 13 and Fig 5. Therefore, DCs should cooperate and share their resources to minimize expenses. Fig 5 indicates that the largest cost and vehicle gaps are generated when forming the grand alliance. Although the collaboration with any other DC is cost effective, the participants intend to increase their profit by considering global sharing and forming a grand alliance. In addition, the logistics provider as the coordinator would not be allocated any profits, and so the synergy requirement parameter σ = 0. The cost savings are equally allocated among DC1, DC2, DC3, and DC4 using MCRS. Table 14 shows the allocation results. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 14. Profit distribution of DCs for global sharing. https://doi.org/10.1371/journal.pone.0242555.t014 Table 14 shows that different DCs gain different profits in different alliance scenarios. For example, the profit of DC1 for cooperating with DC2 is $2170, whereas its profit for cooperating with DC3 is $1661. In practice, the DC attached to any alliance is subjected to profit gaining from the entire network. Most economically driven companies participate in the alliance to maximize profit. The order in which participants join the alliance will affect the results of the profit allocation [66]. SMP is a method to find the proper alliance sequence for maximizing benefits [48]. In accordance with SMP [24], the feasible alliance sequences are shown in Table 15. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 15. Feasible alliance based on global sharing in CMCLDN-RS. https://doi.org/10.1371/journal.pone.0242555.t015 Comparisons of all the feasible collaboration sequences in Table 15 indicate that the optimal alliance of the collaborative network is ϕ1 = {DC1,DC2,DC3,DC4}, as shown in Table 16. In greater detail, the optimal collaboration strategy can be described as follows: DC1 joins the alliance first and achieves 5% cost reduction; DC2 follows and yields 29.6% reduction, and DC1 has 33.6% reduction; when DC3 joins, the reduction becomes 34.6%, 29.8%, and 22.8% for DC1, DC2, and DC3, respectively; and as DC4 enters, DC1, DC2, DC3, and DC4 can reduce their costs by 39.0%, 36.0%, 51.3%, and 41.0%, respectively. Download: PPT PowerPoint slide PNG larger image TIFF original image Table 16. Optimal collaboration sequences based on the SMP principle. https://doi.org/10.1371/journal.pone.0242555.t016 To verify the accuracy of our profit distribution, the Shapley value model, nucleolus, and cost gap allocation (CGA) are applied to find distribution schemes corresponding to the grand alliance and are then compared with MCRS. Considering previous research [67], the core center shown in Fig 6 is also obtained by compressing the polyhedron and narrowing the core into a single point. Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 6. Profit allocation by using MCRS, Shapley, nucleolus, and CGA. https://doi.org/10.1371/journal.pone.0242555.g006 Comparisons of the distance between each profit allocation method and the core center prove that CGA is the farthest from the core center and MCRS is the closest. Therefore, the best profit allocation scheme among DCs is $2584, $2777, $2565, and $2448, and MCRS is selected to be the most appropriate allocation strategy in this case study. Analysis and discussion Above we discussed two methods of collaboration to solve the optimization problem of CMCLDN-RS. In this subsection, some analyses and comparisons are made to help find a suitable collaborative mechanism. Table 17 shows the difference between three types of delivery networks: (1) non-collaborative delivery network without vehicle sharing (Case A), (2) collaborative delivery network considering vehicle sharing only within each DC (Case B), and (3) A collaborative delivery network in consideration of vehicle sharing within each DC and among DCs (Case C). Download: PPT PowerPoint slide PNG larger image TIFF original image Table 17. Comparison of cases A, B, and C. https://doi.org/10.1371/journal.pone.0242555.t017 The two proposed collaboration methods can save the cost and number of vehicles in the optimized logistics network. As shown in Table 17 and Fig 7, significant reductions in total cost and number of vehicles can be achieved. The total logistics operational cost savings are $3260 in Case A and $10373 in Case B. After the CMCLDN-RS optimization, the cost savings increase to $13509 in Case C. The greatest reduction in total number of vehicles is in Case C, from 33 to 21. Therefore, the resource sharing schemes implemented in Case C are much more useful and efficient for optimizing CMCLDN-RS. Table 18 shows the profits of each DC after optimization. Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 7. Illustration of cost and number of vehicles in cases A, B, and C. https://doi.org/10.1371/journal.pone.0242555.g007 Download: PPT PowerPoint slide PNG larger image TIFF original image Table 18. Profits for each DC in cases A, B, and C. https://doi.org/10.1371/journal.pone.0242555.t018 Table 18 and Fig 8 indicate an obvious profit gap between non-collaborative and collaborative networks for each DC but a relatively small profit gap between Cases B and C. This study considers that the customer demands for special commodities are less than the demands for ordinary commodities. Thus, the cost savings of the component based on vehicle sharing among DCs are relatively small, resulting in low profits for DCs in this part. As shown in Fig 8, the profits for DC1 are $2584 in Case B and $2987 in Case C. The profit gap is $403. However, from a long-term perspective, with the increase of collaboration and the increasing demand for special commodities, the scenario of global vehicle sharing including two types of vehicle sharing schemes is effective. Download: PPT PowerPoint slide PNG larger image TIFF original image Fig 8. Comparison of profits for each DC in cases A, B, and C. https://doi.org/10.1371/journal.pone.0242555.g008 Management insights The CMCLDN-RS optimization provides a reference for the planning of a multicenter logistics network and the improvement of the modern logistics system, which incorporates collaboration among multiple centers and types of resource sharing schemes. Governments and logistics companies can collaborate to integrate logistics resources to improve the efficiency of logistics networks. The managerial insights are provided as follows. Considering different resource sharing schemes in a collaborative multicenter logistics network has far-reaching impacts. The proposed models and intelligent algorithms reduce the total operational cost by $13509 and the number of vehicles by 12 for CMCLDN-RS, which provides a reference for solving the problem of existing different resource sharing schemes in the logistics network. Different resource sharing schemes are suitable for diverse scenarios. A suitable sharing mode can utilize limited logistics resources, improve the utilization rate of resource sharing, and enhance the stability of a cooperative alliance. Therefore, different resource sharing schemes for the rational use of social resources and the development of urban logistics should be considered when designing a logistics network. In the delivery process, a reasonable and effective collaborative mechanism can effectively improve the operational efficiency of the logistics network and reduce the network complexity. The collaborative mechanism can rationally allocate limited resources and achieve resource coordination in the distribution process. Unreasonable transportation phenomena in the non-collaborative logistics network can be effectively avoided by rational division of time periods and rational utilization of resources. Management insights The CMCLDN-RS optimization provides a reference for the planning of a multicenter logistics network and the improvement of the modern logistics system, which incorporates collaboration among multiple centers and types of resource sharing schemes. Governments and logistics companies can collaborate to integrate logistics resources to improve the efficiency of logistics networks. The managerial insights are provided as follows. Considering different resource sharing schemes in a collaborative multicenter logistics network has far-reaching impacts. The proposed models and intelligent algorithms reduce the total operational cost by $13509 and the number of vehicles by 12 for CMCLDN-RS, which provides a reference for solving the problem of existing different resource sharing schemes in the logistics network. Different resource sharing schemes are suitable for diverse scenarios. A suitable sharing mode can utilize limited logistics resources, improve the utilization rate of resource sharing, and enhance the stability of a cooperative alliance. Therefore, different resource sharing schemes for the rational use of social resources and the development of urban logistics should be considered when designing a logistics network. In the delivery process, a reasonable and effective collaborative mechanism can effectively improve the operational efficiency of the logistics network and reduce the network complexity. The collaborative mechanism can rationally allocate limited resources and achieve resource coordination in the distribution process. Unreasonable transportation phenomena in the non-collaborative logistics network can be effectively avoided by rational division of time periods and rational utilization of resources. Conclusions This study evaluates the optimization of a collaborative network on the basis of resource sharing and aims to find the most suitable collaborative delivery mechanism by exploring the diverse collaboration methods among multiple centers. This collaborative mechanism can not only effectively reduce the total operational costs of the collaborative network but also reduce the number of vehicles used to serve customers. The most suitable collaborative mechanism can be obtained by comparing three types of collaborative methods in different logistics networks, including non-collaborative networks, internally shared collaborative networks, and globally shared collaborative networks. A mixed-integer linear programing model is established to minimize the total operational costs. An improved MOPSO algorithm is proposed to solve the optimization problem. A fair profit strategy is presented to allocate the profits to alliance participants. To verify the applicability of the proposed CMCLDN-RS in real life, a case study is conducted in the city of Chengdu, China. The total operational costs and number of vehicles before and after CMCLDN-RS optimization reduce significantly as a result. After the implementation of a collaborative mechanism based on resource sharing, the total operational costs are effectively reduced from $32598 to $19089, indicating savings of $13509; in addition, the number of vehicles changed from 33 to 21, implying a reduction of 12 vehicles. Comparison among AGPSO, NSGA-II, and GA-TS indicates that AGPSO performs best among the three in terms of solution quality. Among the four profit allocation methods of MCRS, Shapley, nucleolus, and CGA, MCRS is proven to be the most appropriate profit allocation method for fairly allocating the cost savings to participants. This study measures the effects of different collaboration modes on the delivery network, an area that needs additional research. Future work can be conducted in the following four directions by considering: (1) different collaboration methods among pickup centers and DCs on the basis of resource sharing; (2) the simultaneous pickup and delivery problem in vehicle sharing; (3) the effect of vehicle space on delivery network optimization; and (4) the dynamic and uncertain customer demands during each vehicle delivery trip in a multi-echelon collaborative network. Supporting information S1 Dataset. The dataset includes the longitude and latitude coordinates and service time windows of all customers and four DCs in case study. https://doi.org/10.1371/journal.pone.0242555.s001 (XLSX) Acknowledgments The authors would like to express our appreciation for the valuable comments made by two anonymous reviewers, which helped us to improve the quality of this paper.
TI - Collaborative multicenter logistics delivery network optimization with resource sharing
JF - PLoS ONE
DO - 10.1371/journal.pone.0242555
DA - 2020-11-23
UR - https://www.deepdyve.com/lp/public-library-of-science-plos-journal/collaborative-multicenter-logistics-delivery-network-optimization-with-aKiIK64WcQ
SP - e0242555
VL - 15
IS - 11
DP - DeepDyve
ER -