TY - JOUR AU1 - Bello, S.K. AU2 - Bajela, G.G. AU3 - Lamidi, S.B. AU4 - Oshinlaja, S. AU5 - AB - International Journal of E-ISSN : 2454-8006 Advances in Scientific Research and Engineering (ijasre) DOI: 10.31695/IJASRE.2020.33914 Volume 6, Issue 10 October - 2020 1 1 1 2 S.K. Bello , G.G. Bajela , S.B. Lamidi and S. Oshinlaja Department of Mechanical Engineering, Lagos State Polytechnic, Ikorodu Department of Civil Engineering, Lagos State Polytechnic, Ikorodu Nigeria ________________________________________________________________________________________________________ ABSTRACT This paper is based on the design and fabricate of a pneumatic can crusher that will reduce to the smallest possible amount of the volume of aluminum cans by 70%. The can crusher is made up of various parts containing parts such as a lever, base frame, can bin, piston cylinder arrangement, chain sprocket mechanism and bearing. The inspiration behind this design came from the wastages in eateries, canteens of big companies where people gather and consume a lot of canned beverages. Thus, it makes sense that there should be an easy way to dispose of used cans properly during large social gatherings. The Can Crushing machine works with the help of pneumatic single acting cylinder. The machine is portable in size, and as such is easily transportable. Most companies find it difficult to dispose of their used cans in hotels and canteens TI - Design and Fabrication of Pneumatic Can Crushing Machine JF - International Journal of Advances in Scientific Research and Engineering DO - 10.31695/ijasre.2020.33914 DA - 2020-01-01 UR - https://www.deepdyve.com/lp/unpaywall/design-and-fabrication-of-pneumatic-can-crushing-machine-aBQu47LJrf DP - DeepDyve ER -