TY - JOUR
AU - Bahramian, Alireza
AB - AbstractThe effect of particle size on the pressure profiles and flow regimes of the bed containing TiO2 microparticles (MPs) was investigated in a fluidized bed. The fluidization behavior of particles with mean diameters, dp, of 170, 200, 225, and 300 μm at different gas velocities, Ug, was investigated both experimental and computational viewpoints. A computational fluid dynamic (CFD) model was developed by the Eulerian–Eulerian approach to evaluate the sensitivity of the Syamlal–O’Brien, and Gidaspow drag models on the predicted results of the bed pressure profiles. The results showed that with increasing particle size, the amplitude of pressure fluctuations increases and the type of flow regime in the bed tended from bubbling to slugging flow regime. The error analysis showed that the use of the Gidaspow model led to more accurate results than the Syamlal–O’Brien model in predicting the bed pressure drop and pressure fluctuations in the slugging flow regime. However, the Syamlal–O’Brien model was more suitable for predicting the pressure profiles in the bubbling flow regime. The results were more suitable for the bed containing particles of 300 μm than the beds with dp ≤ 225 μm. The highest and lowest deviations between the experimental data and simulation outputs were obtained at Ugof 0.295 and 0.650 m/s, respectively. The findings confirmed that the mutual effects existed between the dppressure profiles, and the type of flow regimes in the bed.
TI - Computational analysis of the particle size effect on the pressure profiles and type of flow regimes of TiO2 microparticles in a fluidized bed
JF - International Journal of Chemical Reactor Engineering
DO - 10.1515/ijcre-2021-0216
DA - 2022-06-01
UR - https://www.deepdyve.com/lp/de-gruyter/computational-analysis-of-the-particle-size-effect-on-the-pressure-RYpeIzEUis
SP - 667
EP - 679
VL - 20
IS - 6
DP - DeepDyve
ER -