TY - JOUR
AU - Corp., Oak Ridge Technical Enterprises
AB - NEW INSTRUMENTS, MATERIALS AND TOOLS are available. In order to achieve maximum printing speed, in g cm is then read directly from the meter. Observatiol so that printing will the printer control logic is arranged may also be made of the minimum torque required tc always commence with the next available character required maintain continuous rotation. Tests may be carried out ir in a newly signalled line, without having to wait for the clockwise or anticlockwise directions by operating thc mecha&m to reach a datum condition. The control elec- torque reversing switch situated on the left-hand side of tht tronics are contained in a case separate from the print head. instrument panel. A check on the accuracy of calibration For applications requiring fewer than 14 columns, an appro- provided by a calibrator unit which consists of a light-allq priately moaed electronics unit is available. The Register turn mounted on jewel disk mounted on a spindle which is in Printer can accept binary coded decimal information (4 wire) bearings to minimize friction. Angular rotation of the disk or alternatively ‘one out of N’ code (15 wire) for each column. is controlled by a hair-spring, the rating of which has pre. 
TI - Silicon surface barrier detectors
JO - Journal of Scientific Instruments
DO - 10.1088/0950-7671/39/2/446
DA - 1962-02-01
UR - https://www.deepdyve.com/lp/iop-publishing/silicon-surface-barrier-detectors-Qx255s0Zci
SP - 98
VL - 39
IS - 2
DP - DeepDyve
ER -