TY - JOUR
AU - Akulov, E.
AB - AUTOMATIC TEMPERATURE REGULATION WITH THERMOSTATS DURING POLYMERIZATION OF PLATES AND BLOCKS (UDC 620.171.5) E. F. Akulov Mining Institute, Siberian Branch of the Academy of Sciences of the USSR, Novosibirsk Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznylth Iskopaemykh, No. 1, pp. 102-103, January-February, 1966 Original article submitted March 13, 1965 The technological conditions required for the polymerization of optically active materials used in the photo- elasticity method vary widely with the volume of the plates and blocks, the type of material, and the quantity and type of additives. At the Mining Laboratory of the Mining Institute of the Siberian Branch of the Academy of Sci- ences of the USSR, we have built and tested a device for automatic air-temperature regulation of the required accuracy. Figure i shows the general appearance of the apparatus, and Fig. 2 shows the connections between the stand- ard circuit elements. The master controller is an RUS-02M electronic programmed control device which acts as a servo system and sets the control program.. This operates in conjunction with an RU4-16A regulator which maintains proportional, astatic and isodromic control. The measuring device is an r balanced bridge with built-in rheostat setting (based on a slide wire with 100% zone 
TI - Automatic temperature regulation with thermostats during polymerization of plates and blocks
JF - Journal of Mining Science
DO - 10.1007/BF02497105
DA - 2006-08-31
UR - https://www.deepdyve.com/lp/springer-journals/automatic-temperature-regulation-with-thermostats-during-POXTJoG4Ky
SP - 78
EP - 79
VL - 2
IS - 1
DP - DeepDyve
ER -