TY - JOUR
AU - 
AB - RESEARCH ARTICLE IEM, Université de Montpellier, Montpellier, France Institute of Space Technology, Islamabad, Pakistan μ μ μ Introduction die. This study focuses on optimizing the punch-die and There is a broad range of components, both in size and stock-stock-holder frictions. Zhang et al. [4] found that higher strain rate results in hardening of the alloy which intricacy that can be fabricated from sheet metals, usually produced in huge amounts by conventional forming reduces the formability of the alloy while lower strain rates tend to enhance the forming limit of the alloy. Naka et al. processes on mechanical presses. There are several types of sheet metal forming methods i.e., cutting, bending, and [5] found that the effect of the strain rate is more significant at elevated temperatures, however, this effect is drawing. In sheet metal forming methods, the primary forces are normally tensile, with secondary compressive insignificant at room temperature. Khan et al. [6] stated that cold working operation (e.g., sheet metal forming) can forces established by the reaction of a workpiece. Schuler [1] stated that metal flow in drawing operations (e.g., wire result in strain hardening of the work-hardened aluminum alloys (e.g., Al-2024, Al-6061, etc.). drawing, tube drawing, and 
TI - Influence Of Coating Thickness On The Formability Of Annealed Aluminum 2024
JF - Advanced Materials Letters
DO - 10.5185/amlett.2020.081544
DA - 2020-08-01
UR - https://www.deepdyve.com/lp/unpaywall/influence-of-coating-thickness-on-the-formability-of-annealed-aluminum-P2Fot8qMtk
DP - DeepDyve
ER -