TY - JOUR
AU - Tedford, J. D.
AB - AbstractThis paper presents a system simulation model of an oil-injected screw liquid chiller, where the refrigerant shell and tube heat exchangers are modelled following local heat transfer integration approach. All major components of the system are modelled in a modular format such as an oil-injected screw compressor, a shell and tube condenser, a flooded evaporator, and a high side-float valve. The simulation results are validated with the experimental data of a multiple-chiller plant at a process industry. The validated results show that the part-load ratio and the glycol-water temperature at the evaporator inlet affect the system performance considerably as compared to the temperature of cooling water entering the condenser.
TI - Simulation model of a screw liquid chiller for process industries using local heat transfer integration approach
JF - Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
DO - 10.1243/095440805X7035
DA - 2005-05-01
UR - https://www.deepdyve.com/lp/sage/simulation-model-of-a-screw-liquid-chiller-for-process-industries-KfX0Ru2vA0
SP - 95
EP - 107
VL - 219
IS - 2
DP - DeepDyve
ER -