TY - JOUR
AB - 1 2 3 4 Mulukuntla Vidya Sagar , Kanjarla Shyam Kumar , Nalla Suresh and Ch Radhika 1,2,3 Department of Mechanical Engineering, WITS Engineering College Department of Mechanical Engineering,UCE,Kakatiya University Abstract—Connecting rod is one of the most important part in automotive engine. Connecting rod is the link between piston and crank shaft. Which it converts reciprocating motion of piston into rotary motion of crank shaft. In internal engines connecting rod is mainly made of steel and aluminum alloys (for light weight and absorb high impact loads) or titanium (for higher performance engines and for higher cost) or composite materials, composite materials is a material made from two or more constituent materials with significantly different physical or chemical properties that, when combined, produce a material with characteristics different from the individual components. The individual components remain separate and distinct within the finished structure. The new material may be preferred for many reasons: common examples include materials which are stronger, lighter, or less expensive when compared to traditional materials. As a connecting rod is rigid, it may transmit either a push or a pull and so the rod may rotate the crank through both halves of a revolution, i.e. Piston pushing 
TI - STATIC ANALYSIS OF CONNECTING ROD
JF - International Journal of Modern Trends in Engineering & Research
DO - 10.21884/ijmter.2017.4368.xogsn
DA - 2017-12-04
UR - https://www.deepdyve.com/lp/unpaywall/static-analysis-of-connecting-rod-Iy0GiYBOPz
DP - DeepDyve
ER -