TY - JOUR
AU1 - Yanatra Budi Pramana
AU2 - Febryanto, Indra Dwi
AU3 - 
AB - Tibuana Journal of applied Industrial Engineering-University of PGRI Adi Buana p-ISSN 2622-2027 DOI : https://doi.org/10.36456/tibuana.4.01.3177.44-48 e-ISSN 2622-2035 Design of Table Chair Flexibility Products Using Antopometry Methods to Minimize Land Use 1 2 Yanatra Budi Pramana , Indra Dwi Febryanto 1,2 Industrial Engineering Department, Faculty of Industrial Technology University of PGRI Adi Buana Surabaya Email : p_yanatra@unipasby.ac.id Abstract— In an increasingly advanced era, all table must also be equipped with a chair as a seat. property or home furniture is required to have a If there is a table without chairs, the function of renewable innovation and efficiency. This is because the table will be less effective or the use of the property or home furniture currently has a very large table will be reduced, especially if the table in mass or size. Large furniture sizes such as chairs and question is a table for eating, a table for studying, tables have an average area of 500cm2. Almost 90% of Indonesian people have tables and chairs as the contents and a table for work, because of the various types of their household furniture. Not only functioned at a table that is used for some of the above home, in restaurants, 
TI - Design of Table Chair Flexibility Products Using Antopometry Methods to Minimize Land Use
JF - Tibuana
DO - 10.36456/tibuana.4.01.3177.44-48
DA - 2021-01-31
UR - https://www.deepdyve.com/lp/unpaywall/design-of-table-chair-flexibility-products-using-antopometry-methods-IvTtm4OIbL
DP - DeepDyve
ER -