TY - JOUR
AU - Chashechkin, Yu. D.
AB - Abstract This is an experimental study of the acoustic method of surface-wave excitation using an underwater source of high-frequency (950 kHz) sound. The surface waves are excited at the sound-beam modulation frequency (3–55 Hz). For a normal fall onto the free surface, the modulated sound beam efficiently generates waves in the gravity-capillary range. This provides flexible electronic control of the main wave parameters (frequency and amplitude) in the packet and continuous modes. The amplitude-frequency characteristics of the process of surface-wave generation were obtained by numerical calculations (based on equations for the rate of acoustic flux and propagation of gravity-capillary surface waves) and by experiments (based on surface wave measurements by optical and contact methods). Both values are very consistent: on the background of a similar monotonic attenuation with frequency, they have a local dip near the minimum of the phase velocity and oscillation in the frequency range above 20 Hz. The experiments on the excitation of wave packets by single acoustic messages with varying lengths and powers, as well as by falling water drops, indicated that, in all cases, the phase characteristics are satisfactorily consistent with one another and the time needed for the signal to arrive at the measurement point is determined by the group velocity.
TI - Modeling the generation and gravity-capillary waves using an underwater sound source
JF - "Izvestiya, Atmospheric and Oceanic Physics"
DO - 10.1134/s0001433809040094
DA - 2009-08-01
UR - https://www.deepdyve.com/lp/springer-journals/modeling-the-generation-and-gravity-capillary-waves-using-an-IiAoWI9G1N
SP - 495
EP - 502
VL - 45
IS - 4
DP - DeepDyve
ER -