TY - JOUR
AB - International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075, Volume-8 Issue-12S, October 2019 Research of Arc Stability in Submerged Arc Welding Based on SiO2 and TiO2 Flux System Vinay Yadav, Ghanshyam Satnami, Manish Bharti  Abstract— In this study the fluxes of the submerged arc by maintaining Flux material in optimum range [2]. Fluxes welding were designed with the help of ternary phase diagram are not easily available for HSLA steel, the structure of that CaO_SiO_2_Al_2 O_3 & CaO_TiO_2_Al_2 O_3 flux systems. flux is not clearly described. Constrained matrix mix design Various combinations of flux constituents and caching and extreme corner design were used to steady and observe parameters for performing submerged arc welding. Orthogonal the influence of flux composition on welded properties [3]. array of Taguchi L9 were used for designing the flux. 3 variable Metal transfer behavior of plasma enhanced gradient of flux constituents were varied at three levels. Total number of metal arc welding was studied by the recording of the arc 18 fluxes were designed for the study. 9 each for TiO2 and SiO2 based flux system. At open circuit voltage bead on the plate weld signal in real time with the help 
TI - Research of Arc Stability in Submerged Arc Welding Based on SiO2 and TiO2 Flux System
JF - Special Issue
DO - 10.35940/ijitee.l1076.10812s19
DA - 2019-12-26
UR - https://www.deepdyve.com/lp/unpaywall/research-of-arc-stability-in-submerged-arc-welding-based-on-sio2-and-IPOaNldNFl
DP - DeepDyve
ER -