TY - JOUR
AU - Kozak, Joanna
AB - Abstract This paper presents a novel, automatic, simple approach to stop-flow photometric determination of Fe(II) in wastewater and wine samples using a multi-pumping flow system with a direct-injection detector. The basis for the determination was the reaction of Fe(II) with 1,10-phenanthroline, which was carried out in the reaction chamber of the direct-injection detector. The research included a selection of appropriate parameters of the proposed analytical procedure and method validation. Under optimized conditions, linear calibration curves were obtained in two concentration ranges of Fe(II) 0.07–1.00 and 1.00–7.00 mg/dm3, with the quantification limit of 0.07 mg/dm3. The procedure was validated by studying the accuracy (8.2%, RE) and precision (9.6 and 14.8%, RSD, for higher and lower concentration range, respectively). The proposed method was successfully employed in Fe(II) determination in spiked wastewater and wine samples with recovery of 95.8–104.5%. Using the procedure, time of a single analysis (for three independently measured signals) was about 300 s and sample and reagent consumptions were 240 and 60 mm3, respectively. Graphic abstract
TI - Novel approach to determination of Fe(II) using a flow system with direct-injection detector
JF - Monatshefte für Chemie - Chemical Monthly
DO - 10.1007/s00706-020-02649-8
DA - 2020-08-01
UR - https://www.deepdyve.com/lp/springer-journals/novel-approach-to-determination-of-fe-ii-using-a-flow-system-with-I8NTZ3m6X6
SP - 1305
EP - 1310
VL - 151
IS - 8
DP - DeepDyve
ER -