TY - JOUR
AU - Rakhimboeva, D S
AB - AnnotationIt was found that with the existing technology of cotton harvesting machines, part of the cotton fiber from the lower cotton boxes on the bushes remains unassembled. The solution to this problem is the creation of an automatic system for copying the field profile by the cotton harvesting machines. The operating principle of the developed system is described. The results of comparative laboratory-field tests of a cotton harvester equipped with this system and a serial cotton harvester are presented. The analysis of the results is presented. In general, according to the results of the work: a schematic diagram is selected for the system of an automatic copying of the field profile by harvesting machines; original components and parts of the system for an automatic copying of the field profile by harvesting machines were manufactured and installed on the experimental machine; a set of field experiments was carried out, the results of which confirm the correctness of the chosen solutions.
TI - The results of the introduction of an automatic system for copying the field profile by harvesting machines into the design of the serial cotton harvesting machine MX-1,8
JF - IOP Conference Series: Earth and Environmental Science
DO - 10.1088/1755-1315/868/1/012090
DA - 2021-10-01
UR - https://www.deepdyve.com/lp/iop-publishing/the-results-of-the-introduction-of-an-automatic-system-for-copying-the-Gxcf41YFYh
VL - 868
IS - 1
DP - DeepDyve
ER -