TY - JOUR
AB - Werkstoffe und Korrosion 29, 283-301 (1978) Metal coatings 297 strength and creep. Some useful results have followed from applica- recommendations for providing improved wire rope life in the tion of the Weibull model to strength measurements. The strength of marine environment.-AA single phase p-Sic is barely affected by neutron irradiation, but the strength of material containing excess Si may be seriously reduced 0830 The Reason for the Loss of Activity of Titanium Andes after irradiation. Silicon carbide has excellent resistance to oxidation Coated with a Layer of Ruthenium Dioxide and Titanium as long as a surface film of silica is maintained. Diffusion of fission Dioxide. T. Loucka. J. Appl. Electrochem.,May 1977,7, products is generally very slow, but it may be increased by structural (3). 211-214 Fin English). imperfections. 64 ref.--AA The galvanostatic method was employed for following the time change of the activated titanium anodes (ATA) potential in 0. 5N-H2SO,. On the basis of the experimental data it is proposed that the loss of ATA Silicon Carbide Corrosion in High-Temperature Gas-Cooled activity results from the formation of a non-conductive oxide film at Reactor Fuel Particles. H. Grubmeier, A.Naoumidis and the Ti/active layer interface. 7 ref.-AA B.A.Thie1e. Nucl.Technol.,Sept. 1977,35,(2),413-427 [in 
TI - Metallische Überzüge/Metal coatings
JF - Materials and Corrosion/Werkstoffe Und Korrosion
DO - 10.1002/maco.19780290416
DA - 1978-04-01
UR - https://www.deepdyve.com/lp/wiley/metallische-berz-ge-metal-coatings-GikPg1GnZy
SP - 297
EP - 298
VL - 29
IS - 4
DP - DeepDyve
ER -