TY - JOUR
AU - Yu, Kai
AB - Bond wire lift-off is one of the major failure mechanisms in the insulated gate bipolar transistor (IGBT) modules. Detecting the fault of bond wires is important to avoid the open-circuit fault of IGBT to ensure the reliable operation of power converters. In this paper, we propose a novel bond wire fatigue detection method for IGBT, which could be used in normal working conditions. Firstly, we investigated the dependence of bond wire fatigue on heatsink thermal resistance. An aging rate K was proposed to compare the measured thermal resistance with the initial value, which could indicate the bond wire fatigue. Then, this proposed method was verified by simulation and experimental results under different current levels. Finally, a power cycling test was used to show the aging process of the IGBT module, which shows the feasibility of proposed method.
TI - A Fault Detection Method of IGBT Bond Wire Fatigue Based on the Reduction of Measured Heatsink Thermal Resistance
JF - Electronics
DO - 10.3390/electronics11071021
DA - 2022-03-24
UR - https://www.deepdyve.com/lp/multidisciplinary-digital-publishing-institute/a-fault-detection-method-of-igbt-bond-wire-fatigue-based-on-the-DHaIDJnWa6
SP - 1021
VL - 11
IS - 7
DP - DeepDyve
ER -