TY - JOUR
AU - Yang, Jie
AB - The difluoro-substituted monomer, N,N′-bis(4-fluorobenzoyl) isophorone diamine (BFID), was prepared via an interfacial reaction from isophorone diamine and 4-fluorobenzoic chloride. It was then reacted with hydroquinone (or resorcinol, 1,1-bis(4-hydroxyphenyl)-1-phenylethane (BHPPE)) to yield a series of semi-aromatic polyamides. For the synthesized semi-aromatic polyamides, differential scanning calorimetry and thermogravimetric analysis confirmed their high glass transition temperatures (Tg), which were between 217 and 239 °C, and good thermal stability with initial degradation temperatures (Td) in the range of 425–430 °C. Tensile test and dynamic mechanical analysis (DMA) results revealed the good mechanical properties of the semi-aromatic polyamides at ambient temperature and even at 200 °C. Rheological characterization displayed complex viscosities at 310 °C for the semi-aromatic polyamide in the range of 990–1350 Pa s, which suggests that they are suitable for melt processing. Better solubility properties for the resultant semi-aromatic polyamides compared to commercial ones were also found. All the results indicated the good processability of the synthesized semi-aromatic polyamides. In addition, they were found to have almost identical optical transmittance (Tran%: 83–85% at 450 nm) as polycarbonate (PC), in the UV-visible region.
TI - Investigation of the synthesis and properties of isophorone and ether units based semi-aromatic polyamides
JO - RSC Advances
DO - 10.1039/c5ra04116c
DA - 2015-06-03
UR - https://www.deepdyve.com/lp/royal-society-of-chemistry/investigation-of-the-synthesis-and-properties-of-isophorone-and-ether-AKziVPpZh7
SP - 49958
EP - 49967
VL - 5
IS - 62
DP - DeepDyve
ER -