TY - JOUR
AU - 
AB - Mario Holik Marija Živić Zdravko Virag Antun Barac https://doi.org/10.21278/TOF.42Si101 ISSN 1333-1124 eISSN 1849-1391 COMPARISON OF FINNED TUBE AND PLATE-FINNED HEAT EXCHANGERS IN WASTE HEAT RECOVERY Summary The use of waste heat recovery devices on mobile units (trucks and ships) is usually limited by the available space and the application of compact heat exchangers is recom- mended for such purposes. The performance of the heat exchanger is defined by the optimized Rankine cycle (to achieve maximum power) and it depends on the mass flow and temperature of the flue gases and selection of the working fluid in Rankine cycle. An example of selection of the preheater performance (in case of water as the working fluid) is considered here, wherein the several surface types of finned tube and plate-finned heat exchangers are used, for which there are measured data of the heat transfer coefficient and friction factor. Heat exchangers are sized according to the criteria of maximum allowed velocity of the flue gases and shapes of the heat exchanger frontal area. The sized heat exchangers were compared with respect to the heat transfer coefficient, the area of the heat exchanger surface on the finned side, the volume of the heat exchanger 
TI - Comparison of Finned Tube and Plate-Finned Heat Exchangers in Waste Heat Recovery
JO - Transactions of FAMENA
DO - 10.21278/tof.42si101
DA - 2018-05-08
UR - https://www.deepdyve.com/lp/unpaywall/comparison-of-finned-tube-and-plate-finned-heat-exchangers-in-waste-77zNpR7zeD
DP - DeepDyve
ER -