TY - JOUR
AU - Jumatov, Y
AB - The paper presents the results of a study in the kinematics and dynamics of a multi-blade disc cutting device. In the advanced hardware scheme, the clipping process is performed as punches. We have a straight blade edge rotated 200 degrees back from the radial direction.As a result, the sliding motion process is reduced and the trunk is easily cut. For this reason, it is advisable to reduce the sliding process when cutting a hard stem, and it is preferable that the blade be made in the form of a hyperbolic spiral, and not an Archimedes spiral, the curvature of which is directed towards the stem, and not in a straight line.Kinematic and dynamic studies performed on a multi-knife disk shearing device accelerate the technological process of the device, increase the pressure of the blade on the trunk, and make it possible to cut it intensively.
TI - Theoretical study of the disc chopping apparatus of the feed chopper
JO - IOP Conference Series: Earth and Environmental Science
DO - 10.1088/1755-1315/1112/1/012047
DA - 2022-12-01
UR - https://www.deepdyve.com/lp/iop-publishing/theoretical-study-of-the-disc-chopping-apparatus-of-the-feed-chopper-6OTUIMyJng
VL - 1112
IS - 1
DP - DeepDyve
ER -