TY - JOUR
AU - Yusupov, R.
AB - PIG IRON THE OPERATION OF A DRUM SCREEN FOR SIFTING FINES FROM HOT AGGLOMERATE (UDC 622.788: 622.742) Ostroukhov, V. F. Andrianov, A. L. Galatonov, M. Ya. A. P. Yakobson, A. L. Tsverling, and R, B. Yusupov Magnitogorsk Metallurgical Combine Translated from Metallurg, No. 11, pp. 25-28, November, 1965 TO improve the sifting of fines from agglomerate at the Magnitogorsk Combine a drum screen was designed and tested in 1961; it was mounted on one of the sintering machines behind the stationary grate screen. During the process of testing the experimental model certain design difficulties were found; they were eliminated during the planning of a new drum screen which was mounted on sintering machine No. 12 and was put into use in April 1963. The screen (Fig. 1) consists of a housing, a drum with grate screens, a rear frame with thrust and support toilers, a front frame with support rollers, a drive, and a drum casing. The casing is welded from two cylinders; the outer casing (the bearing casing, made of 25-ram sheet steel) is provided with longitudinal and transverse reinforcement ribs; the inner casing (protective casing) is assembled from individual sheets 14 mm thick bent along the radius, 
TI - The operation of a drum screen for sifting fines from hot agglomerate
JF - Metallurgist
DO - 10.1007/BF00732875
DA - 2004-11-18
UR - https://www.deepdyve.com/lp/springer-journals/the-operation-of-a-drum-screen-for-sifting-fines-from-hot-agglomerate-5eZa3YhIJ2
SP - 663
EP - 666
VL - 9
IS - 11
DP - DeepDyve
ER -