TY - JOUR
AU - 
AB - ELEKTRONIKA IR ELEKTROTECHNIKA, ISSN 1392-1215, VOL. 19, NO. 5, 2013 http://dx.doi.org/10.5755/j01.eee.19.5.4367 Effects of Spread Spectrum on Output Filter of Buck Converter 1 1 1 J. Jankovskis , D. Stepins , N.Ponomarenko Department of Electronics and Telecommunications, Riga Technical University, Azenes St. 12–407, LV-1048 Riga, Latvia jankovsk@rsf.rtu.lv possibilities to use higher switching frequencies, 
 which Abstract—Consideration is being given to the use of in their turn are growing by a factor approaching to ten in spread spectrum technology (SST) as the one for noise suppression and the one with coexisting action on the recent decades [1]. Nevertheless the operation with as high components of output filter of buck converter. The as possible 
 (following from the use of proper topology, analysis shows that the use of SST produces an available advanced components [2] and apt design) do more additional stress on the output filter components such as than just improve the power density and efficiency; in fact power inductor and output capacitor. For both affects nearly every performance characteristic of the components switching modulation generates extra power supply [3], [4]. The use of highest 
 requires new attention loss (as opposed to unmodulated case) which increases placed on parasitic impedances, 
TI - Effects of Spread Spectrum on Output Filter of Buck Converter
JO - Electronics and Electrical Engineering
DO - 10.5755/j01.eee.19.5.4367
DA - 2013-05-15
UR - https://www.deepdyve.com/lp/unpaywall/effects-of-spread-spectrum-on-output-filter-of-buck-converter-5H2KgmJrI2
DP - DeepDyve
ER -