TY - JOUR
AU - Brondz, B.
AB - 


1.

Introduction of the type GRU-2 “universai” hydro-cutting tool at slow-coking plant has enabled the rate of discharge to be increased by 40% and has reduced consumption of water and electric power by 30 to 40%. The yield of electrode-grade coke has gone up by some 8 to 10%.



2.

By using the “bottom-to-top” method of discharge, the yield of electrode-grade fractions of coke can be increased by 3 to 4%.



3.

Conveying petroleum coke within the plant by crude mechanisms increase the amount the coke that is crushed and pulverized. In order to preserve the electrode-grade fraction sizes of coke, scraper-conveyers should be replaced by belt conveyers and the number of steps in the conveying process should be reduced as much as possible.




TI - Discharging coke from chambers of slow-coking plant
JF - Chemistry and Technology of Fuels and Oils
DO - 10.1007/BF00716976
DA - 2004-11-17
UR - https://www.deepdyve.com/lp/springer-journals/discharging-coke-from-chambers-of-slow-coking-plant-4sRCeDkYW3
SP - 787
EP - 790
VL - 7
IS - 10
DP - DeepDyve
ER -