TY - JOUR
AU - Yamazoe, Noboru
AB - An amperometric limiting current  sensor was fabricated by combining a  conductor (Na superionic conductor, NASICON) with  (or ) layers. The device using  gave a much higher  sensitivity at 200°C compared to that using . The current response of the ‐attached device was almost linear with the  concentration in the range of 0 to 80 ppm. In addition, the selectivity of the device to  was fairly high with respect to other gases which are usually coexistent in combustion exhausts. A sensing mechanism of the device is discussed briefly.
TI - Sodium Ion Conductor Based Sensor Attached with NaNO2 for Amperometric Detection of  NO 2
JF - Journal of the Electrochemical Society
DO - 10.1149/1.1837158
DA - 1996-10-01
UR - https://www.deepdyve.com/lp/iop-publishing/sodium-ion-conductor-based-sensor-attached-with-nano2-for-amperometric-3cSNzUkSnZ
SP - L241
EP - L243
VL - 143
IS - 10
DP - DeepDyve
ER -