TY - JOUR
AU - 
AB - performed to verify these properties. An imaging process is described which captures spectral reflectance Camera Spectral Sensitivities for reflective media. The ultimate target media are prints and Regarding the first of these properties, it should be understood photographs within the collection of the Library of Congress. The that the camera and software do not comprehend that the RGB filter system is based on a fifteen channel LED source and a monochrome array was removed. When imaging normally, the software exports a camera. The LED source sequentially illuminated reference and three-channel “RGB” file. However, if the filter removal was verification targets, with an image captured for each LED channel. complete, the three image planes should be very nearly identical. From the measured data and images of reference targets, a model One method of making this determination is to measure the spectral was developed to predict spectral reflectance. With that model, the sensitivities of the system. The camera was therefore configured to 15 images of a test sample were combined to a single 31-band image the output port of an integrating sphere, the input of which spectral image. Spectral images can be used to calculate averaged the narrow band output of 
TI - Spectral Imaging Method for Reflective Media
JF - Archiving Conference
DO - 10.2352/issn.2168-3204.2022.19.1.21
DA - 2022-06-07
UR - https://www.deepdyve.com/lp/unpaywall/spectral-imaging-method-for-reflective-media-2Di59GuGFH
DP - DeepDyve
ER -