TY - JOUR
AU - Uusimki, Antti
AB - In order to facilitate the fabrication of miniature windings, it is proposed to print the conductor paths side by side on a tape which would be wound around the magnetic core. One-section winding must have a special form and needs connection of separate paths at its ends. These interconnections could be avoided in two-section symmetric magnetic circuits where printed winding with spiral conductor paths could be used. The use of printed solenoid windings is illustrated on the example of a 4 × 4×2.5 mm3 transformer.
TI - Printed solenoid windings for miniature electromagnetic devices
JO - Journal of Micromechanics and Microengineering
DO - 10.1088/0960-1317/9/2/315
DA - 1999-06-01
UR - https://www.deepdyve.com/lp/iop-publishing/printed-solenoid-windings-for-miniature-electromagnetic-devices-1pAKUTrolf
SP - 166
VL - 9
IS - 2
DP - DeepDyve
ER -