TY - JOUR
AU - 
AB - International Journal of Electrical and Computer Engineering (IJECE) Vol. 10, No. 6, December 2020, pp. 6139~6152 ISSN: 2088-8708, DOI: 10.11591/ijece.v10i6.pp6139-6152  6139 Sliding mode performance control applied to a DFIG system for a wind energy production Mansouri Fatima Zohra, Bendjebbar Mokhtar, Mazari Benyounes Laboratory of Development of Electrical Drives (LDEE), University of Sciences and Technology Mohamed Boudiaf, Algeria Article Info ABSTRACT This project presents a strategy of field control then sliding mode control put Article history: in to the conversion process of wind energy containing an asynchronous Received Jun 29, 2019 generator with double fed (DFAG; DFIG). A model was developed for each Revised May 28, 2020 component of the wind turbine (turbine, DFAG and cascade rectifier- Accepted Jun 9, 2020 inverter). MPPT device must be introduced in order to obtain maximum energy efficiency so that PI-MPPT method is made. The objective is to apply this command to control independently the active and reactive powers Keywords: generated by the asynchronous generator uncoupled by orientation from the flow. The results of digital simulations obtained show the improvement of Doubly fed induction generator the performances of the sliding control compared to the field control, also it MPPT has provided information on 
TI - Sliding mode performance control applied to a DFIG system for a wind energy production
JF - International Journal of Electrical and Computer Engineering (IJECE)
DO - 10.11591/ijece.v10i6.pp6139-6152
DA - 2020-12-01
UR - https://www.deepdyve.com/lp/unpaywall/sliding-mode-performance-control-applied-to-a-dfig-system-for-a-wind-0Yat0rI4Wv
DP - DeepDyve
ER -