TY - JOUR
AU - Li, Xiaofeng
AB - The microchannel plates are electron multiplier which mainly used in image intensifier tubes for imaging and  intensification of the photoelectron image. In this paper, the research models of the funnel microchannel plate are established by the CST Studio Suite software. The whole research model includes the particle emission source, the funnel  microchannel plate model with input reinforcement film and the detector module. Under the same parameter settings of  the particle emission source, the influence of the input electrode depth of the funnel microchannel plate on the incident  particles is studied. The detector module is placed in a fixed position and the electrode depth vary from 0 μm to 7 μm with an appropriate step. Under different electrode depth, the electron distributions on the input surface and at the 7 μm depth  of the funnel microchannel plate are obtained. After processing the data, the influence of the input electrode depth on the  incident electron distribution is obtained, which lays a foundation for the further theoretical and structural research of the  funnel microchannel plate. Meanwhile, the related experiments are carried out for the funnel microchannel plate with  different input electrode depth, and the experimental results are compared with the simulation results.
TI - Study on the input electrode depth of the funnel microchannel plate
JF - Proceedings of SPIE
DO - 10.1117/12.2663028
DA - 2023-04-04
UR - https://www.deepdyve.com/lp/spie/study-on-the-input-electrode-depth-of-the-funnel-microchannel-plate-0Nt0IpiB8o
SP - 126170D
EP - 126170D-5
VL - 12617
IS - 
DP - DeepDyve
ER -