TY - JOUR
AU - 
AB - Material Science. Textile and Clothing Technology doi: 10.7250/mstct.2013.010 2013 / 8_____________________________________________________________________________________________________________ Inese Parkova, Riga Technical University, Institute of Textile Materials Technologies and Design Abstract. Electrotextiles represent a huge potential in creating weft, which are interlaced at right angles to form a fabric [5]. a new generation of flexible textile platforms for electronic Fully or partly replacing traditional (non-conductive) textile systems and smart garments. In this research of electrotextile yarns with conductive textile yarns, it is possible to get woven fabrication weaving method was used. Fully or partly replacing conductive textile material or fabric circuit. traditional (non-conductive) textile yarns with conductive textile yarns, it is possible to get woven conductive textile material or II. MATERIALS AND METHODS fabric circuit. In the paper weaving method is considered for electro textile design and process of flexible textile light-emitting For electrotextile design digital hand looms were used with display fabrication is described. Fabric with interwoven warp density 38 yarns / cm. Weave was projected in conductive yarns to which light-emitting diodes (LEDs) were Weavepoint software. In warp and weft yarn systems cotton attached was designed. This technology is not only limited to light yarns were used, in some parts of textile for electrical 
TI - Woven Light Emitting Display
JF - Materials Science. Textile and Clothing Technology
DO - 10.7250/mstct.2013.010
DA - 2014-02-06
UR - https://www.deepdyve.com/lp/unpaywall/woven-light-emitting-display-03bb0h89ow
DP - DeepDyve
ER -