Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/de-gruyter/enhancing-the-physico-mechanical-properties-of-irradiated-rubber-waste-vmtMTM0gN3
References (18)
-
S. Pavlidou, C. Papaspyrides (2008)
A review on polymer–layered silicate nanocompositesProgress in Polymer Science, 33
-
H. Essawy, D. El-Nashar (2004)
The use of montmorillonite as a reinforcing and compatibilizing filler for NBR/SBR rubber blendPolymer Testing, 23
-
Sung‐Seen Choi, C. Nah, Seung Lee, C. Joo (2003)
Effect of filler–filler interaction on rheological behaviour of natural rubber compounds filled with both carbon black and silicaPolymer International, 52
-
R. Vaia, E. Giannelis (2001)
Polymer Nanocomposites: Status and OpportunitiesMRS Bulletin, 26
-
S. Ray, M. Okamoto (2003)
POLYMER/LAYERED SILICATE NANOCOMPOSITES: A REVIEW FROM PREPARATION TO PROCESSINGProgress in Polymer Science, 28
-
M. Sarker, M. Rashid, M. Molla, Muhammad Rahman (2012)
Thermal Conversion of Waste Plastics (HDPE, PP and PS) to Produce Mixture of HydrocarbonsAmerican Journal of Environmental Engineering, 2
-
A. Lugão, B. Artel, A. Yoshiga, L. Lima, D. Parra, J. Bueno, S. Liberman, M. Farrah, W. Terçariol, H. Otaguro (2007)
Production of high melt strength polypropylene by gamma irradiationRadiation Physics and Chemistry, 76
-
A. Chmielewski, M. Haji-Saeid, S. Ahmed (2005)
Progress in radiation processing of polymersNuclear Instruments & Methods in Physics Research Section B-beam Interactions With Materials and Atoms, 236
-
M. Allaf, M. Shahriari, M. Sohrabpour (2004)
Monte Carlo source simulation technique for solution of interference reactions in INAA experiments: a preliminary reportRadiation Physics and Chemistry, 69
-
D. Xu, J. Karger‐Kocsis, A. Schlarb (2008)
Rolling wear of EPDM and SBR rubbers as a function of carbon black contents: correlation with microhardnessJournal of Materials Science, 43
-
S. Datta (2016)
Rubber–Plastic Blends: Structure–Property Relationship -
G. Choudalakis, A. Gotsis (2009)
Permeability of polymer/clay nanocomposites: A reviewEuropean Polymer Journal, 45
-
A. Okada, A. Usuki (1995)
The chemistry of polymer-clay hybridsMaterials Science and Engineering: C, 3
-
J. Boer, A. Pennings (1983)
The effect of pendant chains on the elasticity behaviour of polyethylene networksColloid and Polymer Science, 261
-
I. Banik, A. Bhowmick (2000)
Effect of electron beam irradiation on the properties of crosslinked rubbersRadiation Physics and Chemistry, 58
-
M. Mohamed, R. Mounir, N. Shaltout (2012)
Radiation vulcanization of filler-reinforced natural rubber/styrene butadiene rubber blendsJournal of Reinforced Plastics and Composites, 31
-
G. Heinrich, M. Klüppel, T. Vilgis (2002)
Reinforcement of ElastomersCurrent Opinion in Solid State & Materials Science, 6
-
Li Yu, Liu Li, Zhang Wei’an, Fang Yue-e (2004)
A new hybrid nanocomposite prepared by graft copolymerization of butyl acrylate onto chitosan in the presence of organophilic montmorilloniteRadiation Physics and Chemistry, 69
- Publisher
- de Gruyter
- Copyright
- ©2019 Walter de Gruyter GmbH, Berlin/Boston
- ISSN
- 2193-3405
- eISSN
- 2193-3405
- DOI
- 10.1515/ract-2019-3112
- Publisher site
- See Article on Publisher Site
Abstract
AbstractThe effect of gamma radiation on the physico-mechanical properties of ethylene propylene diene monomer rubber/styrene butadiene rubber/waste high density polyethylene blend EPDM/SBR/wHDPE (50/50/30) blend reinforced with different types of fillers 10 phr (part per 100 part of rubber, by weight) of HAF-carbon black, Hisil, and prepared modified organo-montmorillonite (OMMT) clay was investigated. The results obtained showed that the organo-montmorillonite (OMMT) clay is the most effective filler for enhancing the physico-mechanical properties of EPDM/SBR/wHDPE vulcanized composites. Scanning electron microscopy and thermogravimetric analysis characteristics were also, studied.
Journal
Radiochimica Acta – de Gruyter
Published: Jul 28, 2020