Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Optimised Nitrogenbased Atmospheres for Copper Thick Film Manufacture

Optimised Nitrogenbased Atmospheres for Copper Thick Film Manufacture This paper reports the final results of a development project conducted on nitrogenbased atmospheres in order to improve the firing of copper thick films. Having shown that improvements in copper thick film performance can be obtained under production conditions by the control and regulation of oxygen additions during the first stages of firing, the authors studied the effects on copper thick film systems of other gaseous oxidisers CO2, N2O, H2O injected into the nitrogen furnace atmosphere either throughout the entire furnace or into its burnout zone only. SEM examinations of the microstructures of copper films, correlated with properties such as adhesion, solderability and resistivity, allow ideal firing atmosphere conditions for copper thick film manufacturing to be determined it is necessary to restrict atmosphere doping to the burnout zone oxygen and water vapour are the most effective gaseous dopants. Some specific equipments have been developed for controlling the injection of these dopants into the furnace atmosphere. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Microelectronics International Emerald Publishing

Optimised Nitrogenbased Atmospheres for Copper Thick Film Manufacture

Microelectronics International , Volume 9 (1): 7 – Jan 1, 1992

Loading next page...
 
/lp/emerald-publishing/optimised-nitrogenbased-atmospheres-for-copper-thick-film-manufacture-nBUEmvJB4t

References (3)

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
1356-5362
DOI
10.1108/eb044464
Publisher site
See Article on Publisher Site

Abstract

This paper reports the final results of a development project conducted on nitrogenbased atmospheres in order to improve the firing of copper thick films. Having shown that improvements in copper thick film performance can be obtained under production conditions by the control and regulation of oxygen additions during the first stages of firing, the authors studied the effects on copper thick film systems of other gaseous oxidisers CO2, N2O, H2O injected into the nitrogen furnace atmosphere either throughout the entire furnace or into its burnout zone only. SEM examinations of the microstructures of copper films, correlated with properties such as adhesion, solderability and resistivity, allow ideal firing atmosphere conditions for copper thick film manufacturing to be determined it is necessary to restrict atmosphere doping to the burnout zone oxygen and water vapour are the most effective gaseous dopants. Some specific equipments have been developed for controlling the injection of these dopants into the furnace atmosphere.

Journal

Microelectronics InternationalEmerald Publishing

Published: Jan 1, 1992

There are no references for this article.