Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

HighSpeed TwistDrill Control

HighSpeed TwistDrill Control Workshop and Production Section AIRCRAFT ENGINEERING September, 1943 Allocation Centre Established in Sheffield APPENDIX A OF DATE OF ALLOCATION WILL BE CONSIDER­ 1. The Ministr y of Supply ha s issued a ne w Control LIST OF MANUFACTURERS AND SUPPLIERS ED CANCELLED AND A NEW REQUISITION Order which became operative on th e 16th August, Sheffield Twist Drill Co. Ltd., Summerfield Street, Sheffield. WILL BE REQUIRED. 1943, known as : "Th e Control of Machine Tools Arthur Balfour & Co. Ltd. Capital Steel Works, Sheffield. (b) If suc h user wishes t o place a n order wit h a (Twist Drills) (No. 1) Order , 1943," which concerns Thos. Firth & John Brown Ltd., Atlas Works, Sheffield. merchan t house regularly employed in th e all persons using High Speed Steel Twist Drills. International Twist Drill Co. Ltd., Intal Works, Watery Street, Sheffield, 3. reselling of High Speed Twist Drills, h e 2. The Orde r makes it illegal for an y perso n to Samuel Osborn & Co. Ltd., Clyde Steel Works, Sheffield, 3. ma y do so withou t reference t o th e Centre, place orders for High Speed Steel Twist Drills of B.S.A. Tools, Ltd., Mackadown Lane, Marston Green, Birmingham, bu t must quote his licence numbe r on th e certai n standard types and sizes, in quantities greate r than those indicated in th e Schedule t o th e Brooke Tool Mfg. Co. Ltd., Warwick Road, Birmingham. order and must not duplicate his action by English Steel Corpn. Ltd., Sheffield. Order (see Appendix C attached) , during certain reference t o th e Centre as well. Stalker Drill Works Ltd., Drill Square, Sheffield, 6. periods of six months ' duration. Users should make Marsh Bros. & Co. Ltd., Ponds Steel Works, Sheffield. themselve s familiar with the term s of th e Order, Easterhrook Allcard & Co. Ltd., Peniston Road, Sheffield, 6. Placement of Orders by Unlicensed Users Strongs British Twist Drill Co. Ltd., Precision Works, Johnson an d this communication must be regarde d only a s Street, Sheffield. 9. The placement of orders for H.S.S. Twist conveying certain information and guidance to Turton Bros. & Matthews, Wentworth Street, Sheffield. Drills of th e type s and sizes quoted in para . 7, b y persons who ma y apply for a licence, and no t as a n R. W. Carr & Co. Ltd., Pluto Works, Sheffield. Walter Spencer, Ltd., Crescent Steel Works, Warren Street, Shef­ users whose volume of orders are such as t o b e authoritativ e statement of the construction or field, 4. below the number in all the categories in th e effect of th e Order. G. & J . Hall, Ltd., Hereford Street Works, Sheffield, 1. Schedule t o th e Order ma y be mad e in on e of thre e - Leadbeater & Scott Ltd., St . Mary's Works, Penistone Road, 3 . Drills u p t o th e number s state d in th e Schedule - ways . As WIT H LICENSED USERS, ORDERS MUST NOT Sheffield, 6. ma y be ordered during the six months' period Harper & Schofield Ltd., Dacre Street, The Park, Sheffield, 2. BE DUPLICATED. withou t licence. Larger users, however, must Henry Rossell, Ltd., Waverley & Hope Works, Sheffield. (a) By submission of a requisition to th e appl y for a licence and t o do so should follow Edgar Allen & Co. Ltd., Imperial Steel Works, Sheffield, 9. Centre as se t ou t in 8 (a) when the advice J. Beardshaw & Sons Ltd., Baltic Steel Works, Sheffield, 9. carefully the instruction s given. Thos. Chatwin & Co., Gt. Tindal Street, Birmingham, 16. of th e Centre as t o th e mos t favourable Flockton Tomkin & Co. Ltd., Newhall Steel Works, Sheffield, 9. source of supply will, of course, be avail ­ Jonas & Colver (Novo), Ltd., Novo Steel Works, Sheffield, 9. Application for Licence able , based on th e knowledg e of th e loading A. Matheson & Son, Ltd., East Campbell Street, Glasgow, C. Moss & Gamble Bros. Ltd., Flanklin Works, Wadsley Bdge., of all suppliers. 4 . Form R.S. 15C. ha s bee n drafted so tha t th e Sheffield. uppe r par t constitutes an applicatio n for a licence. (b) By direct reference to an y supplie r listed Sanderson Bros. & Newbould, Ltd., Attercliffe Steel Works, Newhall Users t o who m it applies will b e require d to fill u p in Appendix A. providing tha t the Centr e Road, Sheffield. Vanadium Steel Co. Ltd., Watery Street, Sheffield, 3. ha s no t been approached. th e application and als o give th e particulars neces­ Alfred Herbert Ltd., Foleshill, Coventry. sar y in th e Retur n below it, leaving the Licence (c) By placement with a merchan t house regu­ Richard Lloyd & Sons Ltd., Steelhousc Works, Oliver Street, printe d on th e back for completion by th e Ministry. larly engaged in the reselling of High Birmingham, 7. The application must be prepared in duplicate, Chas. Churchill & Co. Ltd., Coventry Road, Birmingham. Speed Twist Drills. G. H. Alexander & Co. Ltd., 82 Coleshill Street, Birmingham. bot h copies of which must be forwarded to th e Buck & Hickman Ltd., 2·6 Whitechapel Road, London, E.1 . Controller of Jigs, Tools and Gauges, Machine Tool E. P. Barrus, Ltd., Brunei Road, Acton, London, W.3. Placement of Orders by Resellers Control, addressed as indicated thereon. After Skylux Ltd., Brunei Road, Acton, London, W.3. Resellers wishing t o plac e orders for H.S.S . Twist Gaston E. Marbalx, Ltd., th e necessary investigation, a Licence will b e issued Drills of th e types an d sizes quoted in para . 7, wit h an d forwarded to th e applican t for th e whole or a APPENDIX B an y of th e suppliers listed on Appendix A. must portio n of his requirement s as ma y b e found pos­ submi t requisitions t o th e Allocatio n Centre in th e FORM OF REQUISITION sible. The Manager, form prescribed in Appendix B. The Allocation Copies of Application Form R.S. 15C. can b e High Speed Steel Twist Drills Allocation Centre, Centre having in mind the loadin g of th e various 32 Kenwood Park Road, Sheffield, 7. obtaine d from the Controller of Jigs, Tools an d suppliers will mak e suitabl e allocation, an d wherever Dale Gauges, from th e Allocatio n Centre a t th e addres s possible will nominate the desired source of supply given or from any Regional Director of Machine from indicated by th e reseller. XYZ Co. Ltd., Tools. On receipt of th e Allocation from the Centre, a Address copy of which will b e sen t t o th e nominated supplier) Retention of Licence DEAR SIR, th e reseller must place his orde r with the supplier Wo require the following High Speed Steel Twist Drills:— indicated, and all further negotiations relating to 5. Every user mus t retain his Licence during th e 250 x ¼ in . dia. Morse taper shanks 250 x ¼ in . dia. Straight shanks taper length tha t order must be between reseller and supplier. period of its validity, i.e. six months, the first 72 x ½ in . dia. Morse taper shanks ANY ALLOCATIONS NOT TAKEN UP WITHIN 14 DAYS licence period expiring on th e 16th February, 1944; 36 x ¾ in . dia. Straight shanks taper length OF DATE OF ALLOCATION WILL BE CONSIDERED CAN­ a t the end of tha t time, it mus t be returne d to th e 12 x 1½ in . dia. Morse taper shanks 6 x 2 in. dia. Morse taper shanks CELLED AND A NEW REQUISITION WILL BE REQUIRED. Controller of Jigs, Tools and Gauges, Machine Tool The following is the information you require:— Control, when another application should be for­ 1. Licence number and date (if licensed) warded on form R.S. 15C. for a new Licence for a 2. Delivery required—to commence complete Cancellation of Outstanding Orders. further six month s period if required . A t thi s time a 3. Usual supplier 4. Contract numbers on which purchaser is engaged 11. All users and resellers must review all order s statemen t will b e require d giving particulars of all Please advise us with whom we should place our order. the y have placed with any source of supply and orders placed under the authorit y of th e expired Yours faithfully, relat e these t o thei r existing stocks and anticipated Licence. In ever y communication t o an y person o r . , XYZ Co. Ltd. requirements , making whatever adjustments are departmen t concerned, th e numbe r of th e Licence necessary b y mutuall y agreed cancellations wit h th e ' APPENDIX C mus t be quoted . supplier in question. TYPES AND SIZES AND PERMITTED QUOTAS I T IS O F PARAMOUN T IMPORTANCE IN TH E NATIONAL High Speed Steel Twist Drills of the Quota for any Twist Drills Allocation Centre INTERES T THAT ALL ORDERS , THE EXECUTIO N OF following Descriptions Licence Period 6. I n order to deal with the Control hereby- WHIC H CANNOT B E CONSIDERE D STRICTLY NECESSARY A. Standard, up to and including 5/32 in . diameter, FO R THE PROSECUTIO N OF TH E WAR EFFORT AR E instituted , and t o facilitate th e placin g of requisi­ straight shank ... ... ... ... ... 2,000 CANCELLED FORTHWITH AND ACTIVE CO-OPERATION tions for Twist Drills, an organization has been B . Standard, up to and including 5/32 in. diameter, tapershank ... ... ... ... ... 100 O F ' USER , RESELLER AND SUPPLIER IS REQUESTED . founded, viz. Th e Twis t Drills Allocation Centre, C. Standard, over 5/32 in . diameter up to and including Thi s particularl y applies t o th e range of sizes coming a t 32 Kenwood Park Road, Sheffield, 10. Th e ⅝ in. diameter, whether straight shank or taper immediatel y within the scope of th e Allocation Centre will operate under th e direction of th e Con­ shank ... ... ... ... ... ... 200 D. Standard, over ⅝ in. diameter, whether straight Centre a s th e work of settin g u p th e Centre will b e troller of Jigs, Tools and Gauges, Machine Tool shank or taper shank ... ... ... ... 50 Control and is OPEN TO RECEIV E REQUISITIONS considerably facilitated if promp t action is take n t o E . All other types (including Specials and left-hand COMMENCING ON AUGUS T 16TH from users or re­ adjus t outstanding orders as hereb y requested. twist drills) not covered above ... ... ... 500 sellers of Twist Drills as set ou t in succeeding 12. I t is importan t to not e that the Allocation paragraphs . Centre is concerned only with the allocation of Orders must not be Duplicated orders t o certai n suppliers according t o th e stat e of 8. (a) If such user wishes t o plac e a n orde r with th e market . The y ar e no t concerned wit h an d cannot Range of Drills to be Dealt with by the an y of th e suppliers listed in Appendi x A . answer any inquirie s regarding delivery of orders Allocation Centre of thi s memorandum , a requisitio n mus t be placed, prices, or technical matters of an y kind . first lodged with th e Allocatio n Centre in 7. ALTHOUGH THE CONTROL ORDE R COVERS, AND These must be addressed directly to th e supplier. th e form set ou t in Appendix B, The WIL L THEREFORE APPLY TO, TH E FULL RANGE O F Allocation Centre havin g in mind th e load­ HIG H SPEED STEEL TWIS T DRILLS, IT I S INTENDE D Non-Acceptance of Orders ing of th e various suppliers will mak e suit­ I N THE ALLOCATION CENTRE AS A COMMENCEMENT 13. To facilitat e th e work of openin g th e Centre, abl e allocation of source of supply and TO DEAL ONLY WIT H STANDARD TWIST DRILLS O F all suppliers have agreed only t o accep t emergency whenever possible will nominate the de­ HIG H SPEED STEEL WITH MORSE TAPER SHANKS orders as from th e dat e of thi s memorandum until sired source indicated by th e user. On U P TO 3 IN . DIAMETER, INCLUDING M/M AND FRAC­ Allocation s commence on th e 16th August. receipt of th e Allocation from th e Centre , TIONAL SIZES, AND ALSO STRAIGHT SHANK DRILLS a copy of whic h will be sen t t o th e nomin­ 14. I t will b e readily recognized tha t only b y close TAPE R LENGTHS UP TO 1$ IN. DIAMETER (BOTH ate d supplier, th e user mus t place hi s order co-operation and attentio n to th e system upon TYPE S RISING B Y 64TH S AND 0·5 M/M STEPS). NO wit h th e supplier indicated and all further which th e centr e will operate, can th e desired re ­ othe r types either standard or specials will a t first negotiatio n relating t o tha t order mus t b e sult s b e accomplished. be dealt with and due notice of extension s t o othe r betwee n user and supplier . ANY ALLOCA­ Issued by the Machine Tool Control, 35 Old Queen sizes an d type s will b e given by th e Centre from time TION S NOT TAKEN UP WITHIN 14 DAYS Street, London, S.W.1. to time as th e organizatio n progresses. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Aircraft Engineering and Aerospace Technology Emerald Publishing

HighSpeed TwistDrill Control

Aircraft Engineering and Aerospace Technology , Volume 15 (9): 1 – Sep 1, 1943
Download PDF
1 page

Loading next page...
 
/lp/emerald-publishing/highspeed-twistdrill-control-Q2rhpk2H7D

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0002-2667
DOI
10.1108/eb031056
Publisher site
See Article on Publisher Site

Abstract

Workshop and Production Section AIRCRAFT ENGINEERING September, 1943 Allocation Centre Established in Sheffield APPENDIX A OF DATE OF ALLOCATION WILL BE CONSIDER­ 1. The Ministr y of Supply ha s issued a ne w Control LIST OF MANUFACTURERS AND SUPPLIERS ED CANCELLED AND A NEW REQUISITION Order which became operative on th e 16th August, Sheffield Twist Drill Co. Ltd., Summerfield Street, Sheffield. WILL BE REQUIRED. 1943, known as : "Th e Control of Machine Tools Arthur Balfour & Co. Ltd. Capital Steel Works, Sheffield. (b) If suc h user wishes t o place a n order wit h a (Twist Drills) (No. 1) Order , 1943," which concerns Thos. Firth & John Brown Ltd., Atlas Works, Sheffield. merchan t house regularly employed in th e all persons using High Speed Steel Twist Drills. International Twist Drill Co. Ltd., Intal Works, Watery Street, Sheffield, 3. reselling of High Speed Twist Drills, h e 2. The Orde r makes it illegal for an y perso n to Samuel Osborn & Co. Ltd., Clyde Steel Works, Sheffield, 3. ma y do so withou t reference t o th e Centre, place orders for High Speed Steel Twist Drills of B.S.A. Tools, Ltd., Mackadown Lane, Marston Green, Birmingham, bu t must quote his licence numbe r on th e certai n standard types and sizes, in quantities greate r than those indicated in th e Schedule t o th e Brooke Tool Mfg. Co. Ltd., Warwick Road, Birmingham. order and must not duplicate his action by English Steel Corpn. Ltd., Sheffield. Order (see Appendix C attached) , during certain reference t o th e Centre as well. Stalker Drill Works Ltd., Drill Square, Sheffield, 6. periods of six months ' duration. Users should make Marsh Bros. & Co. Ltd., Ponds Steel Works, Sheffield. themselve s familiar with the term s of th e Order, Easterhrook Allcard & Co. Ltd., Peniston Road, Sheffield, 6. Placement of Orders by Unlicensed Users Strongs British Twist Drill Co. Ltd., Precision Works, Johnson an d this communication must be regarde d only a s Street, Sheffield. 9. The placement of orders for H.S.S. Twist conveying certain information and guidance to Turton Bros. & Matthews, Wentworth Street, Sheffield. Drills of th e type s and sizes quoted in para . 7, b y persons who ma y apply for a licence, and no t as a n R. W. Carr & Co. Ltd., Pluto Works, Sheffield. Walter Spencer, Ltd., Crescent Steel Works, Warren Street, Shef­ users whose volume of orders are such as t o b e authoritativ e statement of the construction or field, 4. below the number in all the categories in th e effect of th e Order. G. & J . Hall, Ltd., Hereford Street Works, Sheffield, 1. Schedule t o th e Order ma y be mad e in on e of thre e - Leadbeater & Scott Ltd., St . Mary's Works, Penistone Road, 3 . Drills u p t o th e number s state d in th e Schedule - ways . As WIT H LICENSED USERS, ORDERS MUST NOT Sheffield, 6. ma y be ordered during the six months' period Harper & Schofield Ltd., Dacre Street, The Park, Sheffield, 2. BE DUPLICATED. withou t licence. Larger users, however, must Henry Rossell, Ltd., Waverley & Hope Works, Sheffield. (a) By submission of a requisition to th e appl y for a licence and t o do so should follow Edgar Allen & Co. Ltd., Imperial Steel Works, Sheffield, 9. Centre as se t ou t in 8 (a) when the advice J. Beardshaw & Sons Ltd., Baltic Steel Works, Sheffield, 9. carefully the instruction s given. Thos. Chatwin & Co., Gt. Tindal Street, Birmingham, 16. of th e Centre as t o th e mos t favourable Flockton Tomkin & Co. Ltd., Newhall Steel Works, Sheffield, 9. source of supply will, of course, be avail ­ Jonas & Colver (Novo), Ltd., Novo Steel Works, Sheffield, 9. Application for Licence able , based on th e knowledg e of th e loading A. Matheson & Son, Ltd., East Campbell Street, Glasgow, C. Moss & Gamble Bros. Ltd., Flanklin Works, Wadsley Bdge., of all suppliers. 4 . Form R.S. 15C. ha s bee n drafted so tha t th e Sheffield. uppe r par t constitutes an applicatio n for a licence. (b) By direct reference to an y supplie r listed Sanderson Bros. & Newbould, Ltd., Attercliffe Steel Works, Newhall Users t o who m it applies will b e require d to fill u p in Appendix A. providing tha t the Centr e Road, Sheffield. Vanadium Steel Co. Ltd., Watery Street, Sheffield, 3. ha s no t been approached. th e application and als o give th e particulars neces­ Alfred Herbert Ltd., Foleshill, Coventry. sar y in th e Retur n below it, leaving the Licence (c) By placement with a merchan t house regu­ Richard Lloyd & Sons Ltd., Steelhousc Works, Oliver Street, printe d on th e back for completion by th e Ministry. larly engaged in the reselling of High Birmingham, 7. The application must be prepared in duplicate, Chas. Churchill & Co. Ltd., Coventry Road, Birmingham. Speed Twist Drills. G. H. Alexander & Co. Ltd., 82 Coleshill Street, Birmingham. bot h copies of which must be forwarded to th e Buck & Hickman Ltd., 2·6 Whitechapel Road, London, E.1 . Controller of Jigs, Tools and Gauges, Machine Tool E. P. Barrus, Ltd., Brunei Road, Acton, London, W.3. Placement of Orders by Resellers Control, addressed as indicated thereon. After Skylux Ltd., Brunei Road, Acton, London, W.3. Resellers wishing t o plac e orders for H.S.S . Twist Gaston E. Marbalx, Ltd., th e necessary investigation, a Licence will b e issued Drills of th e types an d sizes quoted in para . 7, wit h an d forwarded to th e applican t for th e whole or a APPENDIX B an y of th e suppliers listed on Appendix A. must portio n of his requirement s as ma y b e found pos­ submi t requisitions t o th e Allocatio n Centre in th e FORM OF REQUISITION sible. The Manager, form prescribed in Appendix B. The Allocation Copies of Application Form R.S. 15C. can b e High Speed Steel Twist Drills Allocation Centre, Centre having in mind the loadin g of th e various 32 Kenwood Park Road, Sheffield, 7. obtaine d from the Controller of Jigs, Tools an d suppliers will mak e suitabl e allocation, an d wherever Dale Gauges, from th e Allocatio n Centre a t th e addres s possible will nominate the desired source of supply given or from any Regional Director of Machine from indicated by th e reseller. XYZ Co. Ltd., Tools. On receipt of th e Allocation from the Centre, a Address copy of which will b e sen t t o th e nominated supplier) Retention of Licence DEAR SIR, th e reseller must place his orde r with the supplier Wo require the following High Speed Steel Twist Drills:— indicated, and all further negotiations relating to 5. Every user mus t retain his Licence during th e 250 x ¼ in . dia. Morse taper shanks 250 x ¼ in . dia. Straight shanks taper length tha t order must be between reseller and supplier. period of its validity, i.e. six months, the first 72 x ½ in . dia. Morse taper shanks ANY ALLOCATIONS NOT TAKEN UP WITHIN 14 DAYS licence period expiring on th e 16th February, 1944; 36 x ¾ in . dia. Straight shanks taper length OF DATE OF ALLOCATION WILL BE CONSIDERED CAN­ a t the end of tha t time, it mus t be returne d to th e 12 x 1½ in . dia. Morse taper shanks 6 x 2 in. dia. Morse taper shanks CELLED AND A NEW REQUISITION WILL BE REQUIRED. Controller of Jigs, Tools and Gauges, Machine Tool The following is the information you require:— Control, when another application should be for­ 1. Licence number and date (if licensed) warded on form R.S. 15C. for a new Licence for a 2. Delivery required—to commence complete Cancellation of Outstanding Orders. further six month s period if required . A t thi s time a 3. Usual supplier 4. Contract numbers on which purchaser is engaged 11. All users and resellers must review all order s statemen t will b e require d giving particulars of all Please advise us with whom we should place our order. the y have placed with any source of supply and orders placed under the authorit y of th e expired Yours faithfully, relat e these t o thei r existing stocks and anticipated Licence. In ever y communication t o an y person o r . , XYZ Co. Ltd. requirements , making whatever adjustments are departmen t concerned, th e numbe r of th e Licence necessary b y mutuall y agreed cancellations wit h th e ' APPENDIX C mus t be quoted . supplier in question. TYPES AND SIZES AND PERMITTED QUOTAS I T IS O F PARAMOUN T IMPORTANCE IN TH E NATIONAL High Speed Steel Twist Drills of the Quota for any Twist Drills Allocation Centre INTERES T THAT ALL ORDERS , THE EXECUTIO N OF following Descriptions Licence Period 6. I n order to deal with the Control hereby- WHIC H CANNOT B E CONSIDERE D STRICTLY NECESSARY A. Standard, up to and including 5/32 in . diameter, FO R THE PROSECUTIO N OF TH E WAR EFFORT AR E instituted , and t o facilitate th e placin g of requisi­ straight shank ... ... ... ... ... 2,000 CANCELLED FORTHWITH AND ACTIVE CO-OPERATION tions for Twist Drills, an organization has been B . Standard, up to and including 5/32 in. diameter, tapershank ... ... ... ... ... 100 O F ' USER , RESELLER AND SUPPLIER IS REQUESTED . founded, viz. Th e Twis t Drills Allocation Centre, C. Standard, over 5/32 in . diameter up to and including Thi s particularl y applies t o th e range of sizes coming a t 32 Kenwood Park Road, Sheffield, 10. Th e ⅝ in. diameter, whether straight shank or taper immediatel y within the scope of th e Allocation Centre will operate under th e direction of th e Con­ shank ... ... ... ... ... ... 200 D. Standard, over ⅝ in. diameter, whether straight Centre a s th e work of settin g u p th e Centre will b e troller of Jigs, Tools and Gauges, Machine Tool shank or taper shank ... ... ... ... 50 Control and is OPEN TO RECEIV E REQUISITIONS considerably facilitated if promp t action is take n t o E . All other types (including Specials and left-hand COMMENCING ON AUGUS T 16TH from users or re­ adjus t outstanding orders as hereb y requested. twist drills) not covered above ... ... ... 500 sellers of Twist Drills as set ou t in succeeding 12. I t is importan t to not e that the Allocation paragraphs . Centre is concerned only with the allocation of Orders must not be Duplicated orders t o certai n suppliers according t o th e stat e of 8. (a) If such user wishes t o plac e a n orde r with th e market . The y ar e no t concerned wit h an d cannot Range of Drills to be Dealt with by the an y of th e suppliers listed in Appendi x A . answer any inquirie s regarding delivery of orders Allocation Centre of thi s memorandum , a requisitio n mus t be placed, prices, or technical matters of an y kind . first lodged with th e Allocatio n Centre in 7. ALTHOUGH THE CONTROL ORDE R COVERS, AND These must be addressed directly to th e supplier. th e form set ou t in Appendix B, The WIL L THEREFORE APPLY TO, TH E FULL RANGE O F Allocation Centre havin g in mind th e load­ HIG H SPEED STEEL TWIS T DRILLS, IT I S INTENDE D Non-Acceptance of Orders ing of th e various suppliers will mak e suit­ I N THE ALLOCATION CENTRE AS A COMMENCEMENT 13. To facilitat e th e work of openin g th e Centre, abl e allocation of source of supply and TO DEAL ONLY WIT H STANDARD TWIST DRILLS O F all suppliers have agreed only t o accep t emergency whenever possible will nominate the de­ HIG H SPEED STEEL WITH MORSE TAPER SHANKS orders as from th e dat e of thi s memorandum until sired source indicated by th e user. On U P TO 3 IN . DIAMETER, INCLUDING M/M AND FRAC­ Allocation s commence on th e 16th August. receipt of th e Allocation from th e Centre , TIONAL SIZES, AND ALSO STRAIGHT SHANK DRILLS a copy of whic h will be sen t t o th e nomin­ 14. I t will b e readily recognized tha t only b y close TAPE R LENGTHS UP TO 1$ IN. DIAMETER (BOTH ate d supplier, th e user mus t place hi s order co-operation and attentio n to th e system upon TYPE S RISING B Y 64TH S AND 0·5 M/M STEPS). NO wit h th e supplier indicated and all further which th e centr e will operate, can th e desired re ­ othe r types either standard or specials will a t first negotiatio n relating t o tha t order mus t b e sult s b e accomplished. be dealt with and due notice of extension s t o othe r betwee n user and supplier . ANY ALLOCA­ Issued by the Machine Tool Control, 35 Old Queen sizes an d type s will b e given by th e Centre from time TION S NOT TAKEN UP WITHIN 14 DAYS Street, London, S.W.1. to time as th e organizatio n progresses.

Journal

Aircraft Engineering and Aerospace Technology – Emerald Publishing

Published: Sep 1, 1943

There are no references for this article.