Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Tools for the Workshop

Tools for the Workshop The Brush Surface Analyzer is designed for rapidly analyzing and directly recording the irregularities of finished surfaces of metals, glass, paper, plated and painted surfaces and the like. It consists of three principal units an analyzing head, a calibrating amplifier and a direct inking oscillograph. These three units give an instantaneous and permanent record of a finished surface, the irregularities of which may be magnified as desired up to 100,000 times. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Aircraft Engineering and Aerospace Technology Emerald Publishing

Tools for the Workshop

Aircraft Engineering and Aerospace Technology , Volume 13 (5): 2 – May 1, 1941
Download PDF
2 pages

Loading next page...
 
/lp/emerald-publishing/tools-for-the-workshop-6dawMlAExf

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0002-2667
DOI
10.1108/eb030777
Publisher site
See Article on Publisher Site

Abstract

The Brush Surface Analyzer is designed for rapidly analyzing and directly recording the irregularities of finished surfaces of metals, glass, paper, plated and painted surfaces and the like. It consists of three principal units an analyzing head, a calibrating amplifier and a direct inking oscillograph. These three units give an instantaneous and permanent record of a finished surface, the irregularities of which may be magnified as desired up to 100,000 times.

Journal

Aircraft Engineering and Aerospace Technology – Emerald Publishing

Published: May 1, 1941

There are no references for this article.